BIQU 3D-M6 0.4mm Brass Extruder Nozzle Print Head for 1.75mm Filament 3D Printer (Pack of 5pcs)

Specifications:
5*0.4mm J-head extruder nozzle

Product Features

  • Bore diameter: 0.4mm
  • Screw thread inner diameter: 1.75mm
  • Height: 12.20mm
  • Net weight: 2.5g/pcs
  • Widely use for 1.75mm PLA filament

Click Here For More Information

[Sintron] 3D Printer MK8 Extruder hotend 0.4mm Nozzle Latest Upgrade Print Head for 3D Printer Reprap Mendel MakerBot, Prusa i3 & rework (3D-MK8)

Overview:

The extruder is almost the most important part for 3D printer, also the most difficult part to calibrate. we have made necessary design to prevent “jammed” problem. I can’t emphasize anymore how important this is, other sellers don’t have this and would cause many problems.

Features:

(1)The extrude is with thermistor sensor.
(2)Compatible with ABS and PLA 1.75mm.

Tips:

While using with PLA filament, please always remember to keep the fan on, otherwise it might get jammed and ruin the hotend. PLA is more easier to get jammed, so it might require some patience to practice.
For ABS, we would also suggest to keep the fan on, as this is also better. also remember to purchase filament from good reputation seller, as the filament is very important!
( default for this is with 0.4mm nozzle, and suitable for 1.75mm filament )

Specifications:

(1)Nozzle:0.4mm
(2)Voltage:12V/24V
(3)Motor Model:SL42STH40-1204A
(4)Nozzle Flow Rate:24cc / h
(5)Thermistor Tpye:NTC 100K 3950
(6)Sports Shaft Speed:10-100mm

Motor Parameters:

(1)Model:SL42STH40-1204A
(2)Step Angle:1.8∘
(3)Rated Voltage:2.55 V
(4)Rated Current:1.7 A
(5)Phase Resistance:1.5Ω
(6)Phase Resistance:2.3 mH
(7)Number of Lead Wire:10-100mm

Product Features

  • (1)We have made necessary design to prevent “jammed” problem.
  • (2)The extrude is with thermistor sensor.
  • (3)Compatible with ABS and PLA 1.75mm.
  • (4)We not just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can.

Click Here For More Information

8pcs M6 Thread 3D Printer Brass Nozzle Copper Extruder Head for 1.75mm Filament (Four Sizes 0.2mm 0.3mm 0.4mm 0.5mm)

Package includes:

2 x 0.2mm Nozzle
2 x 0.3mm Nozzle
2 x 0.4mm Nozzle
2 x 0.5mm Nozzle

Product Features

  • Material: Brass
  • Nozzle Holes: 0.2mm, 0.3mm, 0.4mm, 0.5mm
  • Size (Diameter x Height): about 0.7 x 1.7cm (0.28 x 0.68″ )
  • Package included: 8 x Printer Nozzles (2pcs for Each Nozzle Hole)

Visit The Website For More Information…