3D Printer Glue Sticks, Aokin 3 Pcs Solid Stickers for ABS, PLA, and PETG Filament on 3D Printer Platform Heated Bed

3D printer Glue Sticks, Aokin 3 Pcs Solid Stickers for ABS, PLA, and PETG Filament on 3D Printer Platform Heated Bed

Feature:

1. Help easy remove printing model: in 3D printing, first layer issues are one of the most common problems, can easily release the 3D print part once the build plate has cooled.

2. Easy use and clean: only spread on an active printing area( not the whole surface). Can wash or wet paper towel for clean 3D printer build plate after use.

3. Durable: can last use for 100+ average prints. 

4. Size: 98mm x 24mm / 3.8″ x 0.94″

5. Weight: 21g / 0.05 lb

Package includes:

3 Pcs washable glue stick

If you have any question about our product, please feel free to contact us, we will do our best for you.

Product Features

  • Purpose: strong adhesion for reduces warping for filament on heated build plates, and use it on an active printing area before printing can help us easier to remove the printing models, so solve 3D printing first layer issue.
  • Compatibility: the all-purpose glue sticks for all 3D Printer heated bed, include build surface sheet plate, aluminum and glass plate, Creality Ender 3 CR 10 Anet A8 Makerbot Prusa etc.
  • Easy to apply and spreads cleanly and evenly, safe and non-toxic, acid-free, easy use, easy clean. Can wash or wet paper towel for clean 3D printer build plate after use.
  • The glue sticks also for arts and crafts, school projects, and more. Please replace the lid when finished to prevent stored glue from drying out.
  • Each glue sticks contains 21 g/0.74 ounces of white glue, twist up for access to more as needed, can last use for 100+ average prints.

Detailed Information available on our Homepage…

Calorbot 3D Printer Parts 12″ x 12″ x 0.3″ Heated Bed Insulation Lightweight Foam Foil Self-Adhesive Insulation Mat Sticker Hotbed Thermal Pad for Creality CR-10 Reprap Ultimaker Makerbot – 2 Pack

Material: Obturator elastic material

Installation Notices:
1. Please clean the surface you want to paste.
2. Make insulation materials and sheet metal firm fit, and play best adhesive, damping performance
3. Do not cover the chassis wiring or air holes when you installation.
4. Appropriate use of adhesive tape will strengthen connections effect.
5. Paste Aluminum Soundproof/Damping Plate,you could heat with a hair dryer to make it soft, then compacted by hand. If the room temperature is below 5 degrees Celsius, first with sun lamp heating it until soft. Then remove the wax paper and paste it.
6. A successful installation process is best not to repeat tear paste, paste effect won’t be damaged.
7. The extra insulation can be pasted in some hidden place.

Easy way to improve 3D bed heating. Heats faster! Uses less power to keep it hot.

Package includes:
2 x 12 inch Hotbed Thermal Pad Insulation Foam

Product Features

  • Heat Bed Insulation 3D Printer Accessories: Lightweight Foam Foil, Self-Adhesive Insulation Mat. Strong sound insulation and absorption performance, heat-resistant, fire preven, durable, healthy, cold-resistant, waterproof, low thermal conductivity, shock absorption and antisepsis;
  • Apply to 3D Printer Heated Bed, aluminum substrate, PCB hot bed, silicone hot bed bottom;
  • Suggestion Temperature: – 50℃ to 150℃ (-58℉~302℉);
  • Size: 300 x 300 x 8mm ( 12″x12″x 0.3″ );
  • Compatibility: CR-10, Reprap Ultimaker Makerbot, Tevo Tornado, wanhao D6, Anet E12 and many other 3D Printers;

Visit The Website For More Information…

Flex Magnetic Two Layer Print Hot Bed Sticker Build Surface Tape for 3D Printer Build Platform Heated Bed(180x180mm)

Note:Please make sure that the product has two parts. The blue part is the surface, another part back with 3m adhesive which should stick on the hot bed. Or you should adjust the 90 degrees direction if there is a weak magnetic

Specification:
Size: 180mm x 180mm
Colour: blue

Package:
1 x A Magnetic Hot Bed Sticker
1 x B Magnetic Hot Bed Sticker

Product Features

  • Please make sure that the product has two parts. The blue part is the surface, another part back with 3m adhesive which should stick on the hot bed. Or you should adjust the 90 degrees direction if there is a weak magnetic
  • The sheet adheres to a print bed to help the filament stick during printing warping
  • The sheet adheres to a print bed or heatbed to help the filament stick during printing and easy to clean and remove the printed part
  • Compatible with PLA/ABS/PETG filament, allow to print surface without additional adhesives or tape
  • We advice the temperature of the hot bed should not exceed 80℃

Detailed Information available on our Homepage…