BIGTREETECH DIRECT 2pcs High Precision V6 Throat Heat with Teflon PTFE Tube Break for E3d V6 Hotend Heater Block 1.75mm 3D Printer Parts & Accessories


Name:V6 Throat Heat with TeflonTube
Size: V6 Bodwen
Material: All metal
Suit for: 1.75mm Filament
Screw Threads: M6
Heat break: Cost-effective

1. Heat Break: cost-effective
2. All metal Heat Break: corrosion-resistant, high temperature resistant, durable,
suitable for high-temperature 3D printing that other throat cannot handle
3. High-Quality Heat Break: Higher Temperature Resistance
4. Production equipment: High-precision imported professional
equipment to better ensure product consistency.
5.Deburring treatment: Four major processes, strict quality assurance. No burrs anti-oxidation and clean surface
6.Our High-quality Heat Break Throat(There are no obvious burrs in the inner hole, and spit out filament is more smooth)

Product Features

  • Size: V6 Bodwen
  • Material:Metal and PTFE
  • Suit for: 1.75mm Filament
  • Screw Threads: M6
  • Heat break: Cost-effective

Visit The Website For More Information…

BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350 degrees

Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.

Package listing:
3 x 12V 50W Ceramic Cartridge Heater

Product Features

  • Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
  • The improvement compared to ordinary red heating tube:
  • 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
  • 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
  • 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.

Visit The Website For More Information…

BCZAMD 3D Printer Parts Super Wire Connection for Ceramic Cartridge Heater Heating Tube/Thermistor 100k Ntc 3950 Hotend CR-10 Anet A8 (SPL-2, 10PCS)

We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineer of technical team will always support you here.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.

Product Name : Super Wire Connector 2 Pole
Model : SPL-2
Rated Voltage : 400V
Rated Impulse Voltage : 4KV

Description:
Universal Wire Connector
Material of Insulation: modified nylon(PA66)
Contact Material: phosphor copper
Wire Cross Section: 0.08~4.0mm2(single hard wire), 0.08~4.0mm2(multi soft wire)
Color: Grey+Orange
Rated Current: 32A
Rated Power: 7KW
Gauge: 28~12AWG
Strip Length: 9 – 10mm
Package: polybag
Compatible: e3d v6 heater hotend

How to use our products:
1.Strip the wire according to the specified length.
2.Dismantle the orange operation handle straight and plug the wire into the hole.
3.lower the handle.

Package includes:
1 x 10PCS Super Wire Connector 2 Pole

Product Features

  • The connector for joining braided and solid wire and wires of differing sizes. They work with such as 3d printer CR-10 Anet A8 ceramic cartridge heater wire and most every gauge of normal household wiring: ceiling fans, sockets, switches, cars, motorcycles, ships, loudspeakers, lamps, electrical boxes, chandeliers, light switches, fan controls, and much more.
  • This is a connection of artifact, bid farewell to the traditional tape winding way, this product is to use safe, reliable, convenient and allows you to stay away from the electrical fire and wiring.
  • The operation is very convenient, the first peel line length 9–11mm, pull rod terminals (Orange), dial to 90 degrees.
  • The end of the thread into the hole, back rod (Orange), will connect the wire.
  • The suture method is very simple, the operation is the reverse direction, the terminal can be used repeatedly.

Visit The Website For More Information…