Thermistor 3D Printer Part 120cm/3.9ft NTC 3950 100K ohm Thermistor for RepRap 3D Printer Extruder Heating Bed Prewired

Product Features

  • Model: NTC 3950.
  • Length: 120cm/3.9ft.
  • Thermistor: 100K ohm.
  • Suitable for: pre wiring thermistor for RepRap 3D printer extruder or heating bed.
  • Here is 24-hour service, if you have any problem, please feel free to contact us.

Visit The Website For More Information…

3D Printer Parts 12V/24V 40W Heating Pipe Single-Ended Electric Heater Elements 620mm Heating Tube for HotEnd Cable

:
Design for replacing the heater tube’s inconvenience trouble,this cartridge heater has the plug connection,making connecting the wirie stable. Easy to install,without needing to disassemble,you can replace the heater directly by plug the damaged one.
The number of coils varies depending on the power, and provide a great uniform distribution of heat,which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures.
The solids,liquids,and gases need to be heated by cartridge heater,transmit heat quickly by conduction if the producer of the heat is in direct contact with the heat sink.

Product Features

  • Design for replacing the heater tube’s inconvenience trouble,this cartridge heater has the plug connection,making connecting the wirie stable. Easy to install,without needing to disassemble,you can replace the heater directly by plug the damaged one.
  • The number of coils varies depending on the power, and provide a great uniform distribution of heat,which considerably increases the long life of the heater as well as prevents the oxidation of the heater wire even at high temperatures.
  • The solids,liquids,and gases need to be heated by cartridge heater,transmit heat quickly by conduction if the producer of the heat is in direct contact with the heat sink.

Visit The Website For More Information…

Aluminium Extruder Heater Block 3D Printer Parts MK7 MK8 20x20x10mm Head Hot End Heating Block

Specification:
Model: MK7 MK8
Material: Aluminium
Color: Silver White
Size: 20x20x10mm/0.78×0.78×0.39”
Weight: 9g
Application: 3D printer

Note:
Please allow slight size differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understand.

Package inckuded:
1 x MK7 MK8 Aluminium Extruder Heater Block

Product Features

  • Model: MK7 MK8.
  • Material: Aluminium.
  • Size: 20x20x10mm/0.78×0.78×0.39”.
  • Weight: 9g.
  • Offering 24-hour service, if you have any problem, please feel free to contact us.

Visit The Website For More Information…