Stepper Motor Nema 17, 3 PCS Nema 17 Stepper Motor Bipolar 2.0A 59N.cm Holding Torque 4-lead 1.8 Deg 42 Motor for 3D Printer Hobby CNC Router XYZ By Beauty Star

Specification:
Motor type: bipolar stepper
Step Angle: 1.8 deg.
Step Accuracy 5%
Holding Torque: 59Ncm(84 oz.in)
Rated Current/phase: 2.0A
Phase Resistance 1.4ohms
Voltage 2.8V
Inductance 3.0mH¡À20%(1KHz)
Weight: 400g
Frame Size: 42 x 42mm
Body Length: 48mm
Shaft Diameter: 5mm
Shaft Length: 24mm
Wire: 1m 4-lead wire with connecter

Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)

Attention Please:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • Package in 3PCS motors with high torque.
  • 59Ncm(83.6oz.in) holding torque.
  • NEMA 17 bipolar 1.65″x1.65″x1.85″ 4-wire.
  • Build with 1m Cable and 0.1″ pitch Connector.
  • Rated current 2.0A & resistance 1.4ohms.

Click Here For More Information

3D Printer Standard + Jhead Extruder Nozzle Head Cleaner KIT 4pc .40mm bits + BIT HOLDING Pin-Vise TOOL

3D Printer Standard + Jhead Kit Extruder Nozzle Head Cleaner Bits .4mm 4pc + 3.5″ Bit Holding Pin-Vise Tool

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro dtill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

THE TOOL
This pin-vise tool is perfect for hand cleaning the nozzle head to your 3D printer. You can use a drill to do the job, but the hand held tool is more safe. The high speeds of electric drills can cause damage to the nozzle head if the user does not have very steady hands. This tool is very easy to hold and compact at 3.5″ long. Inserting the bit into the tool could not be more easy. The screw bits can be used for other projects or to work on your 3D printer.

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • Japanese made tungsten carbide bits
  • For Standard + J-head nozzles
  • 3.5″ comfortably held nozzle cleaning pin-vise tool

Visit The Website For More Information…

3D Printer Kit Extruder Nozzle Head Cleaner Bits .2mm .25mm .3mm .35mm .4mm 10 pk + 3.5″ Bit Holding Pin Vise Tool

3D Printer Kit Extruder Nozzle Head Cleaner Bits .2mm .25mm.3mm .35mm .4mm 10 pack + 3.5″ Bit Holding Pin-Vise Tool

THE BITS: These Micro-drill bit Extruder Nozzle Cleaners are an essential item for any 3D printer owner. Every extruder nozzle must be cleaned out from time to time. These nozzles are very difficult to clean properly. These micro drill bits are of the highest quality, made in Japan. They are the perfect tool for the job. By using these precision drill bits, you will extend the life of your nozzle and without a doubt, produce finer prints. If you need another size or have any questions, contact us and we will take care of you.

THE PIN-VISE:

-3.5 Pin Vise -1 Chuck -Double Sided -1/8″ and smaller shank capacity

Many Uses:

3D printer nozzle cleaning
Small scale miniatures
Dollhouse Miniatures
Modeling: Cars, Trucks, Trains …..
Wire for jewelry
Sandings
Carvings
Drilling Instertion Holes
Jewelry Making
Woodworking
Plastics

About the Pin-Vise:
Inserting bits or tools could not be more easy. Simply unscrew the end and remove the chuck. Choose the side of the chuck you need for the job, re-assemble, insert your tool of choice and get to work.

Shank Capacity: 1/8″ (3.175mm) and 3/32″ (2.0mm)

Product Features

  • Will clear nozzles and produce finer prints
  • Shipped in protective plastic case
  • Japanese made tungsten carbide bits
  • From Daewon Industries
  • Pin-Vise Shank Capacity: 1/8″ (3.175mm) and 3/32″ (2.0mm)

Click Here If You Need More Detailed Info…