Multifunctional Hot Bed Knife Spade 3D Print Removal Spatula Stainless Steel Blade Rubber Handle 3D Printer Accessories

Features:
Soft rubber handle and steel knife.
The edge is sharp, the edges are fillet protected, reducing the damage to stickers and hot beds.
Can help you easy get the prints off from the build surface.
It will not scratch build surface. 
An essential addition to your 3D printer tool kit.

Descriptions:
High quality stainless steel, heat treatment, high hardness, good elasticity, durable and durable.
Rubber handle is anti slip for comfortable grip.
Compact and light, portable to carry.

Specifications:
Material: TPR rubber and steel
Size: 204*75*20mm
Color: yellow & black

Package included:
1 x 3D Printer Spatula 

Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!

Product Features

  • Soft rubber handle and steel knife.
  • The edge is sharp, the edges are fillet protected, reducing the damage to stickers and hot beds.
  • Can help you easy get the prints off from the build surface.
  • It will not scratch build surface.
  • An essential addition to your 3D printer tool kit.

Detailed Information available on our Homepage…

14 Sets 3D Printer Nozzle Cleaning & Removal Tools Kit, SourceTon 2 PCS Palette Knife, 10 PCS Needles (5X 0.4mm, 5X 0.3mm) and 2 PCS Tweezers Tools Kit

Directions for Use:

Step 1: To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle.
Step 2: Use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print.
Step 3: If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat.
Step 4:If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the tool.
Step 5: If the nozzles blocked, check the size of output diameter and choose the correct needle. Then, clean the nozzles by cleaning needles and tweezers.

Product Features

  • VARIOUS SIZE – 10 pieces cleaning needles in 2 different size 0.3 mm, 0.4 mm, suitable for cleaning most of your 3D Printer nozzles.
  • PREMIUM QUALITY- Both needles and tweezers are made of high quality stainless steel, flexible, sturdy and durable. The palette knife have a plastic handle and a sharp & hardened blade.
  • STYLISH AND USEFUL- The spatulas have a brown ergonomic plastic comfort grip, one of them has a short beveled front edge, another one has a flat long front edge.
  • WIDE COMPATIBLE- Compatible with most of 3D printers extruder nozzles, such as E3D Makerbot, MK8 Makerbot RepRap and so on.
  • VALUE PACKAGE- The package includes: 2 x Palette Knife, 10 x Needles (5x 0.4mm, 5x 0.3mm) and 2 x Tweezers.

Detailed Information available on our Homepage…

Muscccm 15 Pcs 3D Printer Nozzle Cleaning Kit – Premium 3D Print Tweezers Removal Tool Kit Spatula Palette Knife for Cleaning Printers

Featers:

1.The needles aremade of quality stainless steel, flexible and won’t break easily, with a handlefor easily twisting.

2.The tweezershave Fine tips with non-magnetic coating. Great for repairing small wires,screws, circuit board welding.

3.Reaching where your fingers can’t.Suitable for high-density integrated circuit chip within the operation.

4.Wide suitable:Compatible with most of 3D printers on the market such as Duplicator, MakerBot,RepRap etc.

Product Features

  • 12pcs of 0.40mm nozzle cleaning needles packed in one safe container. Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears.All of the items come in a neat plastic tube to keep them well organized and safely together.
  • The tweezers comes with straight and curved shape tip are perfect for nozzle maintenance and cleaning excess support material, picking up a small object and getting into tight areas. The needles are very sharp, easy to clean your printer extruder hot end nozzle clogs or other small parts.
  • The spatula has a black ergonomic rubber comfort grip. The hardened stainless steel blades, flexible but not too thin or flimsy, safer rounded edges, work well with different size objects without damaging them.
  • The tweezers and needles come in a stylish, neat, sturdy plastic tube with an aluminum screw lid to provide extra protection for the tool for long-lasting. Compatible with most well known 3D Printers on the market.
  • Fit on any 3D Printer 0.4mm nozzle such as Makerbot Creality, CR-10, CR10, Ender 2, Ender 3, Anet A8, Tevo, Tarantula, Lulzbot, MK8, Reprap, E3D, V6, Volcano. Compatible with most well known 3D Printers on the market.

Detailed Information available on our Homepage…