Magigoo MO2018 3D Printing Adhesive for Large Format FDM, ABS, 4 fl. oz, Colorless

Magigoo first layer bed adhesive for large format FDM/FFF 3D printers. Discover a reliable and repeatable adhesive that works with PLA, ABS, PETG, hips, asa, TPU. It sticks when hot and releases when cooled, is safe to use and provides that additional convenience and ease of cleaning.

Product Features

  • Applying on large surfaces is easy. Cover specific area or whole bed, print with or without rafts. Thin layer requires no levelling adjustment. Can compensate errors in levelling or print settings
  • Save time and effort. Once print is cooled it literally detaches itself. Maggio can act as a good release agent. It’s specially useful in cases of excess adhesion on any surface
  • Its easy to clean with damp cloth. Should first layer be still stuck, a few drops of water will detach print safely. Maggio will not clog your nozzle or damage your printer or printer bed

Check Out Our Website For Details…

Magigoo MO2016s an All-in-One 3D Printing Adhesive Sample, ABS, 0.13 fl.oz. Colorless

Magigoo is an all-in-one 3D printing adhesive that offers sure adhesion with Magic release. What is Magigoo favorite is an easy to use 3D printing adhesive designed to address “the first layer not sticking problem”, the most common problem found in FFF 3D printing technology. This problem occurs when a print detaches itself from the printing platform ruining itself. Perfecting the first layer is vital to get a great foundation for rest of the print. In addition, Magigoo also helps to combat 3D print warping.

Product Features

  • Long-lasting: you can print multiple prints on the same layer of Magigoo. These two samples will get you a good test run. Works with most plastics
  • Easy application: applying Magigoo is as easy as child’s play. Tear a sample pack. Put some glue on build surface. Spread with a piece of card on an active printing area only
  • Easy-release: Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled
  • Easy-clean: Magigoo is easily cleaned with water
  • Odourless and safe: Magigoo is safe to use – be it in a closed room or educational workshop with kids

Check Out Our Website For Details…

Magigoo PLA / ABS / HIPS / PETG / Taulman Nylon An All-In-One Adhesive for 3D printing, 50 mm

Magigoo is an all-in-one 3D printing adhesive that offers sure adhesion with Magic release. What is Magigoo for? It is an easy to use 3D printing adhesive designed to address “the first layer not sticking problem”, the most common problem found in FFF 3D printing technology. This problem occurs when a print detaches itself from the printing platform ruining itself. Perfecting the first layer is vital to get a great foundation for rest of the print. In addition, Magigoo also helps to combat 3D print warping.

Product Features

  • Easy application: applying magigoo is as easy as child’s play. Shake, press, apply. Spread on an active printing area only. No need to cover the whole surface
  • Easy-release: magigoo adhesive properties are designed to release the 3D print once the build Plate has cooled
  • Easy-clean: magigoo is easily cleaned with water
  • Long-lasting: magigoo last for 100+ average prints
  • OD our less and safe: magigoo is safe to use – be it in a closed room or educational workshop with Kids

Check Out Our Website For Details…