Anycubic MK2B Dual Power PCB Heatbed Hot Plate with Led and Resistor Cable for 3D Printer Prusa Mendel Update of MK2A

Specification:

Power supply:12V or 24v

2 layer with 35μm copper

Resistance between 1.0 and 1.2 ohm

Package Size:20.5cm×20.5cm×2cm

Package Weight:185g

Package List:

1×MK2B Heatbed with LED Resistor And Cable

Product Features

  • It features a central mounting hole on the front side to allow for three point mounting
  • Copper plated holes
  • Compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed
  • These boards are all fully tested to confirm even heat distribution and correct resistance

Detailed Information available on our Homepage…

[3D CAM] 3D Printer MK2A 300x200mm XL Size Heated Bed, Borosulicate Glass, Hardware, Wiring, Thermistor Kit for Prusa i3 or other RepRap Upgrade

Upgrade your Prusa i3 for 50% more build volume!

Speed up your reprap heated bed assembly – get all necessary upgrade parts in one kit. You will need 4 paper binder clips to hold glass in place, best source for these clips – ebay.com or your local office supply store.

For Large size 300x200mm Y Carriage Plate for Prusa i3 – check out our store

MK2A 300x200mm Heated Bed Specs:

Dimensions: 315mm x 215mm
Hole Spacing: 309mmx209mm
Laminate FR4 2.0mm
2 Layer, 35µm Copper
Red Soldermask – Both Side
White Silkscreen – Both Side
Power Input: 12V DC
Copper Plated Holes

Borosilicate Glass Specs:

Dimensions: 300mm x 200mm
Thickness: 3mm

NTC 3950 Thermistor Specs:

Thermistor temperature value table for Marlin
Small Size: 1.25mmx2.0mm glass bead
High accuracy: 1%
Resistance value at 25°C=100K
Wiring insulation: high temperature teflon/PTFE
Wiring length: 1 meter

Package contents:

1 x MK2A 300x200mm (315 x 215mm outer size) PCB Heated Bed
1 x Borosilicate Glass Print Surface 300x200mm
1 x NTC 3950 Wired Thermistor (wiring is 1 meter long)
1 x Power wiring (2 wires, 1 meter long each)
4 x M3x05 x 25 Stainless socket head screws
4 x M3x05 Steel Locknuts
8 x M3x9 Steel Washers
1 x Silicone Rubber Spacer, about 50mm long

Product Features

  • Upgrade your Prusa i3 for 50% larger print size and volume
  • Get all necessary bits in one kit
  • Compatible with our XL size Prusa i3 carriage
  • Use it with 12V Power Source

Visit The Website For More Information…

Geeetech RepRap 3D Printer PCB Heatbed MK2a heated heat bed & Thermistor for Prusa Mendel, MakerBot

These boards are all fully tested to confirm even heat distribution and correct resistance.Welcome to purchase!

Features:
1. Laminate: FR4 1.6±0.15mm
2. Two layer, 35μm copper
3. Power Input: 12Vdc
4. Copper plated holes
5. Resistance between 1-2 ohm
6. Dimensions 214mmx 214mm

Package list:
1x MK2a heated bed PCB(1k resistor and 2 LED soldered)
1 x 100K ohm Thermistor (Not soldered)

Product Features

  • Laminate: FR4 1.6±0.15mm,Two layer, 35μm copper
  • Power Input: 12Vdc
  • Copper plated holes
  • Resistance between 1-2 ohm
  • Dimensions 214mmx 214mm

Detailed Information available on our Homepage…