Semoic 3D Printer Kit,Ramps 1.4 + Mega 2560 + MK2B Heatbed + Controller I3 Suit 12864

Semoic,a legal trade mark, has been registered. Only those who are authorized are available to sell items under Semoic. Semoic will bring you joyful shopping experience. 3D Printer Kit,Ramps 1.4 + Mega 2560 + MK2B Heatbed + Controller I3 Suit 12864
Mega 2560 control board: core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer. Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery.
Microcontroller
ATmega2560 Operating Voltage: 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 54 (of which 15 provide PWM output)
Analog Input Pins: 16
DC Current per I/O Pin: 40 mA
DC Current for 3.3V Pin: 50 mA
Flash Memory: 256 KB of which 8 KB used by bootloader
SRAM: 8 KB
EEPROM: 4 KB
Clock Speed: 16MHz
PCB Heatbed MK2B Dual Power
This is the later version of MK2B, and can use dual power input, so it is better than MK2A.
Dimensions (Outer): 214mm x 214mm
Dimensions (Heat Bed): 200mm x 200mm
Laminate FR4 1.6+/-0.15mm
2 Layer, 35um Copper
Power Input: 12V/24V DC
Copper Plated Holes
colour: blue & red
Material: metal
Package included
1* Mega 2560 R3
1* LCD 12864 Graphic smart display controller
3* Mechanical endstops + cables
1* MK2B Heatbed
1* Thermistor and high temp wire
1* 2M GT2 belts
2* 30cm Cable
1* Smart adapter
1* USB cable
Only the above package content, other products are not included.

Product Features

  • 3D Printer Controller RAMPS 1.4: The RepRap Arduino-compatible MEGA Pololu Shield, or RAMPS for short. It is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino-compatible Mega with the powerful Arduino-compatible MEGA platform and has plenty room for expansion.
  • The modular design includes plug in stepper drivers and extruder control electronics on an Arduino-compatible MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.Version 1.4 uses surface mount capacitors and resistors to further cover edge issue cases.
  • LCD 12864 Graphic Smart Display Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display.You can easy connect it to your Ramps board using the “smart adapter” included.After connecting this panel to your Ramps you don’t need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller.
  • Print your 3D designs without PC, just with a g-code design stored on the SD card.3 pcs of Mechanical End stops: The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated. It uses a standard 4 pin .pitch header and accepts a standard, old-style CD-ROM audio connector cable.
  • 2M GT2 Belts: For 3D Printing applications, GT2 2mm belt system works better than T2.5, T5, it gives better smoothness and accuracy of positioning, resulting in better printing quality. GT2 timing belt system especially suited for linear movement and positioning applications.

Click Here If You Need More Detailed Info…

Bluedophin Reprap Ramps 1.4 kit + Mega 2560 + Heatbed mk2b + 12864 LCD Controller + DRV8825 + Mechanical Endstop+ Cables For 3D Printer

MK2B Heatbed
MK2B is the latest and the best type of heatbed money can buy as of today. 100% compatible
with all Prusa and Mendel 3d printer variants.
Color: Red
Size: 214mm x 214mm
Etching: 35um copper
Laminate: FR4 1.6mm
Ramps 1.4 Controller Board
This list is Pololu trillion rupiah , or ramps short. It was designed as a low-cost small package
RepRap needs to accommodate the entire electronics . Oblique interfaces with the powerful
Arduino MEGA platform Arduino Mega , and have plenty of room for expansion. On the stepper
drives and a Arduino MEGA shield extruder control electronics for easy maintenance , replacement parts , upgrades and expansion capabilities , including plug-in modular design . In addition, some
Arduino expansion boards can be added to the system , as long as the main ramp plate is saved to the top of the stack .

Product Features

  • Mega 2560 Microcontroller : ATmega2560 Operating Voltage : 5V Input Voltage (recommended) : 7-12V Input Voltage (limits) : 6-20V Digital I/O Pins : 54 (of which 14 provide PWM output) Analog Input Pins : 16 DC Current per I/O Pin : 40 mA DC Current for 3.3V Pin : 50 mA Flash Memory : 256 KB of which 4 KB used by bootloader SRAM : 8 KB EEPROM : 4 KB
  • 12864 LCD Controller Board 3D printers use LCD control panel, are ramps extension accessories. LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel. This version is an upgraded version of reprap smart controller.Mega 2560 Microcontroller : ATmega2560 Operating Voltage : 5V Input Voltage (recommended) : 7-12V Input Voltage (limits) : 6-20V Digital I/O Pins :
  • DRV8825 Stepper Motor Driver The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough. The module has a pinout and interface with our A4988 stepper motor driver carrier is almost the same, so it can be used as a better performance of the pull-down menu board replacement in many applications. DRV8825 features an adjustable current limit, overcurrent and overtemperature protection, six micro-resolution (down 1/32-step).
  • Limit Switch Endstop Quality switching elements. Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug. Red line connecting VCC (ramps of +)
  • Package Content: 1 x RAMPS 1.4 1 x Mega 2560 R3 5 x DRV8825 driver 1 x LCD 12864 With Controller 6 x Mechanical Endstop with cable 4 x 4PIN 70CM Cables 1 x Heatbed MK2B 1 x USB Cable

Click Here If You Need More Detailed Info…

HESAI RED MK2B PCB Heatbed Hot Plate with LED and Resistor and Cable for Reprap Mendel Prusa 3D Printer Support 12V 24V

Specification:

Power supply:12V or 24v

Laminate FR4 1.6+-0.15mm

Resistance between 1.0 -1.4 ohm(12V)or 3-5 ohm (24V)

Item Size:214mmx 214mm

Package List:

1× MK2B Heatbed with LED,Resistor And Cable

Product Features

  • It features a central mounting hole on the front side to allow for three point mounting
  • Copper plated holes
  • Compatible with any 3D printer that can accept the RAMPS MK2B version of heatbed
  • hese boards are all fully tested to confirm even heat distribution and correct resistance
  • Weld LED,Resistor and Cable

Visit The Website For More Information…