BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcsTMC2208 V3.0 UART Mode Driver 3D Printer Parts with LPC1769-120MHz Frequency VS SKR V1.3 / V1.4


※5.【TMC2208 V3.0 Manual】:
https://github.com/bigtreetech/BIGTREETECH-TMC2208-V3.0

※BIGTREETECH SKR V1.4/V1.4 Turbo GitHub:
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

※【SKR Motherboard Parameters】 :
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage:DC 3.3V
WIFI module:ESP-01S
Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
Driver working mode support: SPI、UART、STEP/DIR
Motor driver interface:X、Y、Z、E0、E1,5 way(Each has a closed loop drive interface) up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channel 100K NTC Temperature

※BIGTREETECH SKR V1.4 motherboard is a 32-bit 3D printer motherboard optimized and upgraded by the 3D printing team of
Shenzhen Big Tree Technology CO., LTD. for the deficiencies of V1.3 version, especially suitable for small and medium-sized printers.

※1.SKR Motherboard Features: :
1)Plug-in external DC5V power supply module to supply power to TFT screen, BL touch and Neopixel.
2)Equipped with highly modular and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development;
3)More fan interfaces: 1 way CNC fan, 3 way normally open fan;
4)Support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen;
5)Upgrade and configure the firmware through SD card, which is simple, convenient and efficient;
6)The thermistor interface is protected by a bile capacitor pressurized resistor to enhance the resistance of the interface;
7)Support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing and so on;
8)High performance MOSFET tube, better heat dissipation effect;

Product Features

  • ※1.【SKR V1.4 Turbo】: Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved;
  • ※2.【SKR V1.4 Turbo】: Using dedicated power chip M6130, support 12-24V power input;
  • ※3.【SKR V1.4 Turbo】: Double z-axis interface, eliminating the trouble of external drive expansion module;
  • ※4. 【TMC2208 Ultra-quiet】: Stealth Chop can make the engine work in extreme silence
  • ※5.【TMC2208 V3.0 Features】: Working Mode: Dir Step ##Microplver: 1/256 ##Microplyer Mode: Up to 256 ##Driver Current: Up to 2A ##Input Voltage: 4.75-35VDC ##Logical Voltage: 3.3V-5V ##Decibel: <10dB ##RDSON: ≤0.3Q ##Motor Phase Current: 1.2A RMS, 2.0A Peak

Visit The Website For More Information…

BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcsTMC2209 V1.2 Mode Driver 3D Printer Parts with LPC1769-120MHz Frequency VS SKR V1.3 / V1.4


※【TMC2209 V1.2 GitHub/Manual】:
https://github.com/bigtreetech/BIGTREETECH-TMC2209-V1.2
※BIGTREETECH SKR V1.4/V1.4 Turbo GitHub:
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

※【SKR Motherboard Parameters】 :
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage:DC 3.3V
WIFI module:ESP-01S
Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
Driver working mode support: SPI、UART、STEP/DIR
Motor driver interface:X、Y、Z、E0、E1,5 way(Each has a closed loop drive interface) up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channel 100K NTC Temperature

※BIGTREETECH SKR V1.4 motherboard is a 32-bit 3D printer motherboard optimized and upgraded by the 3D printing team of
Shenzhen Big Tree Technology CO., LTD. for the deficiencies of V1.3 version, especially suitable for small and medium-sized printers.

※1.SKR Motherboard Features: :
1)Plug-in external DC5V power supply module to supply power to TFT screen, BL touch and Neopixel.
2)Equipped with highly modular and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development;
3)More fan interfaces: 1 way CNC fan, 3 way normally open fan;
4)Support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen;
5)Upgrade and configure the firmware through SD card, which is simple, convenient and efficient;
6)The thermistor interface is protected by a bile capacitor pressurized resistor to enhance the resistance of the interface;
7)Support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing and so on;
8)High performance MOSFET tube, better heat dissipation effect;

Product Features

  • ※1.【SKR V1.4 Turbo】Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved;
  • ※2.【SKR V1.4 Turbo】Using dedicated power chip M6130, support 12-24V power input;
  • ※3.【SKR V1.4 Turbo】Double z-axis interface, eliminating the trouble of external drive expansion module;
  • ※4.【TMC2209 V1.2 Working mode】 : Support STEP,DIR/UART mode , you can use these function via modify the firmware.
  • ※5. 【TMC2209 V1.2 VS TMC2208, more of these functions】: 1. Blocking rotation detection (Stallguard–TMC2209 provides a load and loss of speed detection technology)

Visit The Website For More Information…

SainSmart Coreception CoreXY 3D Printer, Dual Z Axis, Silent Drive Mode, Resume Printing, 3.5-inch HD Touch Screen, Large Print Size 300 x 300 x 330 mm 2019 Winter New Coming

Overview

The Coreception is a cost-effective 3D printer that is suitable for hobbyists and professionals alike,
made highly popular because it delivers higher quality 3D prints. One major advantage of this 3D
printer is the excellent stability from using a dual Y-axis control system and box-like
frame.Assembling a Coreception is much easier than other printers and can be completed within
25 minutes, giving you an easy start in 3D printing if this is your first time.

Machine Parameter:

Machine Structure: CoreXY
Printing Technology: FDM
Compatible Filaments: 1.75mm PLA, Wood, TPU, ABS, PETG, Copper Filament, etc.
Slicing Software:CURA, simplify3d and so on.
Heated Bed Temperature: 100°C / 212°F
Voltage : Input 110-240V; Output 24V 15A
Print Size: 300 x 300 x 330 mm
Auto Resume Print: Yes
Titan Extruder

Manual

https://s3.amazonaws.com/s3.image.smart/download/101-91-501/SainSmart_Coreception300_%20Manual.pdf

WHAT’S INCLUDED?

1 x Coreception 3D Printer (Some parts need to be assembled)

Product Features

  • 【Direct drive for more filament flexibility】The geared direct drive extruder now allows you the flexibility to use a wider range of filaments including the following:PLA/ABS/PETG/TPU/CF Nylon /Silk PLA /Wood and Metal infused filaments. And many more fantastic filaments that are compatible with the hotend’s maximum temperature of 260°C / 500°F.
  • 【Appearance Upgraded】 We added RGB led lights on the printer with 3 modes of operation to make your printer look cooler: monochrome, flashing, and speed control. The RGB lights have a total of 7 colors options, which can remotely control the flicker frequency and change color in addition to the daily white light illumination model.
  • 【Upgraded electronics for getting printing faster】Every Coreception includes a full sized PCB heated bed and a 24v power supply that ensures that you can reach your desired temperatures on the carbon glass bed surface in only a few minutes so you can get printing faster. The upgraded mainboard is equipped with industry standard TMC2208 drivers which are quieter than other stepper motor drivers and allow you to enjoy a little bit of peace and quiet.
  • 【Large rigid aluminum frame】With a larger build volume of 12″ x 12″ x 13″ (300mm x 300mm x 330mm) you can tackle larger print projects with confidence.  The sturdy aluminum extrusion cube frame ensures that the gantry and build plate are fully supported and allow to print at higher speeds without fear of any fear of wobble or vibrations that are common in frames that incorporate plastic or printed parts in them which means less frustration and time wasted trying to improve print quality.
  • 【Easy to Assemble】Whether you are an experienced printer looking to expand your print farm or a newcomer looking for a first printer, the Coreception is a great choice for everyone regardless of skill levels. Each Coreception comes shipped partially built with clear instructions for easy assembly and setup in 25 minutes. The Coreception is ideal if you are doing STEM projects, small scale prototyping, costuming, drone making, and so much more. If it can be made from plastic, you can print it! 

Click Here For More Information