Aokin 5Pcs 3D Printer Dual Z Stepper Motor Parallel Module with 100mm Cables,for Dual Double Z Axis Dual Z Stepping Motors, for Reprap Prusa Lerdge 3D Printer Board 3D Printer Parts and Accessories

Feature:
Name: 3D Printer Dual Z Stepper Motor Parallel Module
Size: 25mm*15mm
Cable Length: 100cm

Package :
5pcs Dual z stepper motor parallel modules
5pcs Cables

Product Features

  • Design – New Dual Z Stepper Motor Adapter Parallel Module Diverter Expanding Flow Board Diffuser Splitter.
  • Application – Special designed for 3D printer stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.
  • Module Size – 25mm*15mm; Cable Length: 100mm; Weight: 5g,Comes with a 4 pin cable (4 inch), easy to connect.
  • Note – Only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
  • Pakage List – 5pcs dual z stepper motor parallel modules and 5pcs cables, easy to operate.

Visit The Website For More Information…

Aokin 3D Printer Parts and Accessories, 1pcs 3D Printer Stepper Motor Parallel Module with 100mm Cables for Double Z Axis Dual Z Stepping Motors Reprap Prusa Lerdge 3D Printer Board

1pcs 3D Printer Dual Z Stepper Motor Parallel Module with 2pcs 100mm Cables

Package Included:

1 x stepper motor parallel module

1 x 100mm 4 pin cables

Product Features

  • Module Size: 27mm/1.06in x 15mm/0.59in; Cable Length: 100mm/3.94in; Weight: 5g
  • Package Included: 1pcs stepper motor parallel modules with 1pcs 100mm cables, easy to connect.
  • Application: special design for stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.
  • Compatible: this module is only used for small printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
  • If you have any issues for our products, please contact us by Amazon message, we will do our best for you.

Visit The Website For More Information…

FYSETC 3D Printer Motors, Nema 17 Stepper Motor 42-34 Motor 1.8 Stepper Angle 1.5A 2 Phase Body 4-Lead with 39.3″ Cable for 3D Printer Extruder Reprap Makerbot CNC Creality CR-10 10S Ender 3 Printer

FYSETC is a professional supplier of 3D Printers related accessories products. It has a professional R&D team and high quality after-sales service to ensure that you can enjoy your shopping.

Specifications:

Model Type: MS17HD4P484A-01

Condition: 100% brand new

Number of phase: 2

Step angle: 1.8 degree

Rated Voltage: 4.83 V DC

Rated Current: 0.84A

Holding Torque: 0.35 Nm Typ.(Two phase on/rated current)

Phase Resistance: 5.75 ohm±10%(20℃)

Phase Inductance: 8.4mH±20%(1kHz 1V rms)

Rotor Inertia: 38 g.cm2

Motor Weight: 0.22 kg

Insulation Class: B(130℃)

Connection:

Yellow(A+), Green(A-), Red(B+), Blue(B-)

What the steps/rev are for this stepper motor?
please see the below formula:
E-Steps-per-MM=(Motor Steps * Micro-stepping*Gear Ratio) / (Hobb Diameter*π)
Standard motor steps / rev =200
Standard micro-stepping = 16x
Gear Ratio = 3
Hobb Diameter (Effective)= 7.3

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.

Connecting the motor directly to a power supply will destroy the motor.

Package Included:
1 x 42-34 Nema 17 Stepper Motor
1 x 39.3 in Cable

Product Features

  • Motor Model: 42-34 Nema 17, widely work for Most 3D Printer Reprap Creality Ender 3 CR-10 CR-10s S5, Prusa i3 Monoprice selece mini, Makerbot Mendel Kossel Tevo printer etc.
  • High torque -Holding torque up to 0.35Nm. Low loss stators have better high speed performance.
  • Size: 42mm X 42mm X 34mm. 2 Phase 4 Wires, with 39.3 in/ 1 Meter cable.
  • 100% brand new, ROHS and CE certified.
  • After-sales Support: each one defective item can have the free replace or refund, If need further please fell free to email or QA us, we and our engineers are very happy to assist you.

Visit The Website For More Information…