Silk Rainbow PLA Filament 1.75mm 3D Printer Filament 1KG 2.2LB Shiny Silky Shine 3D Printing Materials Shiny Silk Multicolor Rainbow PLA Filament 1.75mm Metallic Gradient 3D Printing Filament

Specification:
Color: Silk Rainbow
Materials: PLA
Net Weight: 2.2 pounds (1kg)
Diameter: 1.75 millimeters
Print Temp: 195-235℃
Print speed: 30-60 mm/s

Please Pay Attention:
Retract the filament if you are going leave your printer inactive for somedays.
Store this filament in a dry and sealed bag or box to extend the life of your filament.
When storing the filament, Please pass the loose end through the hole at the edge of the filament reel,
this can avoid entanglement. It can be fed correctly and properly when you use it next time.

Product Features

  • No polishing needed, prints Finish by our silk PLA filament have eye-catching luster(Silk Like, Shiny, Glistening), besides it also have a smooth surface.
  • The change from one color to another is random.
  • Feed smoothly and constantly without clogging the nozzle or extruder, perfectly compatible with most of the FDM 3D Printer.
  • Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament.
  • At present, the color of each roll of filament is also random.

Check Out Our Website For Details…

Silk Rainbow Multicolor PLA 3D Printer Filamentt 3mm(2.85mm) 1KG Multi Color Printing Material Gradually Canging Color PLA Rainbow Mulitcolor Multicolored Metallic Color Gradient Filament CC3D

Color:Silk Rainbow
Diameter (Tolerance): 2.85 mm ±0.10 mm
Net Weight: 1000g
Recommended Printing Temp: 195 – 230 °C
Recommended Printing Speed: 30 – 60 mm/s
Heated Bed: Not required but can be used (up to 60 °C)
The dimensions of spool:
Spool Diameter: 20cm
Spool Width: 6.9cm
Spool Hub Hole Diameter: 5.3cm

Product Features

  • NEW COLOR:No polishing needed, printing at a high detail results in a beautiful finish.
  • Highlight silk pla filament multicolored color
  • Nice shiny Special Rainbow Multi Color Gradient
  • Industrial & Scientific > Additive Manufacturing Products > 3D Printing Supplies > 3D Printing Filament
  • The change from one color to another is random.

Check Out Our Website For Details…

BIQU 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer

Introduction
Electronic part is the brain of a 3D printer, and all movements are controlled by electronic parts. The Tango1.0 baord is R&D for 3D Printer,which is Based on AVR Processor ATMEGA2560 controller board.It support three different color filament, You can use a personal computer with a USB cable to control the 3D printer

Product Parameter
product name:BIGTREETECH-Tango V1.0 Dimension:150mm*75mm
Net weight:99g (No driver)
Power output: 12-24V
Support motor number: six
Support motor driver: A4988、DRV8825、TMC2100
Controller screen: LCD2004、LCD12864 and other screen
Compiled file:Arduino IDE
Firmware:Marlin
Controller software:Printrun、Repetier-Host

Product instruction
1. There are six stepper motor and five temperature sensor input interfaces;
2. Power input is 12-24V, the rated voltage of the hot bed is same as the input voltage of the power supply, the voltage of the hot bed will be 12v if the voltage of power supply is 12v,and the voltage of the hot bed will be 24v if the voltage of power supply is 24v.
3.PWM DC output (heating rods, fans, etc.); 6 outputs (1 large current, 3 medium currents, 2 small currents), driven by high performance, low on-resistance MOS transistors, LED as an indicator for each output.
4. Totally support for JTAG operation

Package List:
1xTango 3D Controller
1X USB Cable

Product Features

  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • LCD expansion interface,support LCD screen and SD expansion interface, it can achieve offline printing
  • Using ATMEGA2560 as the main control chip, with high-performance USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit switch; Xmin/Xmax, Ymin/Ymax, Zmin/Zmax can be connected to sensors such as mechanical switches, optical switches, and proximity switches

Visit The Website For More Information…