14 Sets 3D Printer Nozzle Cleaning & Removal Tools Kit, SourceTon 2 PCS Palette Knife, 10 PCS Needles (5X 0.4mm, 5X 0.3mm) and 2 PCS Tweezers Tools Kit

Directions for Use:

Step 1: To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle.
Step 2: Use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print.
Step 3: If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat.
Step 4:If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the tool.
Step 5: If the nozzles blocked, check the size of output diameter and choose the correct needle. Then, clean the nozzles by cleaning needles and tweezers.

Product Features

  • VARIOUS SIZE – 10 pieces cleaning needles in 2 different size 0.3 mm, 0.4 mm, suitable for cleaning most of your 3D Printer nozzles.
  • PREMIUM QUALITY- Both needles and tweezers are made of high quality stainless steel, flexible, sturdy and durable. The palette knife have a plastic handle and a sharp & hardened blade.
  • STYLISH AND USEFUL- The spatulas have a brown ergonomic plastic comfort grip, one of them has a short beveled front edge, another one has a flat long front edge.
  • WIDE COMPATIBLE- Compatible with most of 3D printers extruder nozzles, such as E3D Makerbot, MK8 Makerbot RepRap and so on.
  • VALUE PACKAGE- The package includes: 2 x Palette Knife, 10 x Needles (5x 0.4mm, 5x 0.3mm) and 2 x Tweezers.

Detailed Information available on our Homepage…

MAKEASY 3D Printer Nozzle Cleaninng Kit, 3D Printer Accessories Nozzle Cleaning Tool Kit – 0.4mm Needles Tweezers Filament Clog Cleaner Accessories

Wide Compatibility – Compatible with most of 3D Printer 0.4mm nozzle such as Makerbot Creality, CR-10, CR10, Ender 2, Ender 3, Anet A8, Tevo, Tarantula, Lulzbot, MK8, Reprap, E3D, V6, Volcano, Prusa I3, Prusa MK2, Prusa MK2S, Prusa MK3, and much more.

Product Features

  • ✔Great Value – 2pcs different shape precise tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!
  • ✔The tweezers comes with straight and curved shape tip are perfect for nozzle maintenance and cleaning excess support material. The needles are very sharp, easy to clean your printer extruder hot end nozzle clogs or other small parts: such as feeder gear teeth or any hard to reach areas.
  • ✔10 pcs of 0.40mm diameter flexible stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears
  • ✔Wide Compatibility – Compatible with most of 3D Printer 0.4mm nozzle such as Makerbot Creality, CR-10, CR10, Ender 2, Ender 3, Anet A8, Tevo, Tarantula, Lulzbot, MK8, Reprap, E3D, V6, Volcano, Prusa I3, Prusa MK2, Prusa MK2S, Prusa MK3, and much more.
  • ✔Strict Quality Control & Two-Year Warranty – Every Batch of Makeasy 3D printer accessories had been tested before packing. Our friendly and reliable customer service team will respond to you within 24 hours! You can purchase our products with full confidence.

Click Here If You Need More Detailed Info…

3D Printer Nozzle Cleaning Kit – 0.4mm Needles and Tweezers Toolkit – Stainless Steel Nozzle Cleaning Tool Kit – Set of 12

Product description:

 

Printer nozzlecleaning kit:

The needles aremade of quality stainless steel, flexible and won’t break easily, with a handlefor easily twisting.

The tweezershave Fine tips with non-magnetic coating. Great for repairing small wires,screws, circuit board welding,

 watch and reaching where your fingers can’t.Suitable for high-density integrated circuit chip within the operation

Wide suitable:Compatible with most of 3D printers on the market such as Duplicator, MakerBot,RepRap etc.

 

With a plasticbox:

Wrapped in aplastic box, well organized, easy to find while you need it.

 

Specifications:

Needle:

Material: stainlesssteel

Needle diameter:0.4 mm

The Needlelength: 7.5 cm

The length ofshank: 3 cm

Total length:10.5 cm

 

Tweezer:

Total length:

Straighttweezer: 12cm

Angled tweezer:12.5cm

 

Packageincludes:

2 Tweezers and10pcs of 0.40mm needles for cleaning and unclogging 3D printer nozzles. 

Comesin a hard plastic tube for convenient storage.

Product Features

  • Great quality tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in one safe container!
  • Anti-Static, Non-Magnetic Straight and Angled Precision Tweezers; Every tweezers is plated resistive ESD coating, which prevents static damage to electronic components. Great for nozzle maintenance and cleaning excess support material
  • 10 pcs of 0.40mm diameter flexible stainless steel needles; Ideal for gentle maintenance of your nozzles and hard to reach places like the feed gears
  • Handy, safe and stylish container; All of the items come in a neat plastic tube with a screw lid to keep them well organized and safely together
  • Compatible with most well known 3D Printers on the market (e.g. Duplicator, MakerBot, RepRap etc.)

Detailed Information available on our Homepage…