ALUNAR 50mm x 15mm 12V DC Brushless Blower Cooling Fan for Computer Accessory or DIY Reprap I3 3D Printer Kit Spare Part Nozzle Cooler Anet A6 A8

3D Printer Parts 5015 Cooling Cooler Blower Turbo Fan
DC 12V 0.1A Fan For 50x50x15mm

Description:
Model Number: 5015 Fan
Power supply:12V 0.1A
Used for:3D printer
Size:50*50*15

Package include:
1 x 5015 Fan (50*50*15)mm

Product Features

  • 3D Printer part 12V cooler fan
  • 3D printer spare part 5015 blower cooling fan
  • Cooling fan for the DIY 3D printer kit Anet A6 A8
  • Fan which is used for the nozzle of ALUNAR 3D printer
  • Electrical cooler fan for computer accessory

Visit The Website For More Information…

[Sintron] 1.75mm 3D Printer Drucker Kossel Mini All Metal MK8 Extruder hotend 0.4mm Nozzle for Bowden RepRap Rostock Delta Kossel Mini Prusa i3 (Kossel-Extruder)

Overview

This MK8 extruder is an open source universal suitable for most RepRap and DIY long distance feeding filament 3D Printers.

We have made the NEMA 17 Stepper motor with 4 wires which is specially designed for 3D Printer Controller RAMPS 1.4, so you just need to plug it in, and there you go! no need to buy from others and waste a lot of time trying to figure out how to connect them.

The extruder is almost the most important part for 3D printer, also the most difficult part to calibrate. we have made all metal design to replace plastic parts bowden extruder.

Features

(1) Compatible with ABS and PLA 1.75mm.
(2) NEMA 17 Stepper motor is included in this transaction.

Tips:

While using with PLA filament, please always remember to keep the fan on, otherwise it might get jammed and ruin the hotend. PLA is more easier to get jammed, so it might require some patience to practice.
For ABS, we would also suggest to keep the fan on, as this is also better. also remember to purchase filament from good reputation seller, as the filament is very important!

Specifications
(1) Nozzle : 0.4mm
(2) Voltage : 12V/24V
(3) Motor Model : SL42STH40-1204A
(4) Nozzle Flow Rate : 24cc / h
(5) Thermistor Tpye : NTC 100K 3950
(6) Sports Shaft Speed : 10-100mm

Motor Parameters

(1) Model:SL42STH40-1204A
(2) Step Angle : 1.8°
(3) Rated Voltage : 2.55 V
(4) Rated Current : 1.7 A
(5) Phase Resistance : 1.5Ω
(6) Phase Resistance : 2.3 mH
(7) Number of Lead Wire : 10-100mm

Product Features

  • (1) Compatible with ABS and PLA 1.75mm.
  • (2) NEMA 17 Stepper motor is included in this transaction.
  • (3) We don’t just sell them, we also provide good after-sales service, so welcome to discuss with us, we will try to do technical support as much as we can, please feel free to send us an email, we will also help you to complete the project !

Visit The Website For More Information…

Micromake 3d Printer Parts Kossel Reprep Plastic Injection New Auto-level Effector with J-head Nozzle Full Assembly

Description:
This is Micromake upgraded full assembly new auto-level effector, which has outstanding quality and the best performance for DIY and professional systems.
We add dedicated cooling fan to fit our well-designed double duct so that the consumble can cool quickly after it is extruded. Meanwhile, it can avoid to drop down so the effect of hollow out, high-deviated print and long-distance bridge is better.
And it will need no long time to wait the previous part to cool down at the condition of high speed. With the same effect, you can use faster speed to print. We upgrade auto-level system, add spring to assist the springback, with the high precision injection molding, the accuracy of the probe improved significantly.
Specifications:
The extrusion nozzle: 0.4mm
Chock: 1.75mm
The material of Print: 1.75 PLA/ABS
The flow rate of Nozzle: about 24cc / h
Sports shaft speed:40mm/s
The voltage of heating nozzle: 12V
The operating voltage of cooling fan: 12V
Heating rods: 6mm, 12V, 30Wv Net weight: 270g
Normal working temperature: 190°-230°
NOTE: Make sure the maximum temperature is less than 280°
Feature:
42mm high quality stepper motor with larger torque and less heat buildup
Special ceramic insulation cotton ensures the stability of heating; electricity-saving
Direct transmission, without the heavy gears, compact size and weight
Package list:
Plastic Injection Effector Set
Two fan(one cooling fan, one radiator fan)
E3D Extruder J-Head Nozzle

Product Features

  • Make sure the maximum temperature is less than 280°
  • The extrusion nozzle: 0.4 mm
  • Full assembly new auto-level effector outstanding quality and the best performance for DIY and professional systems.
  • And it will need no long time to wait the previous part to cool down at the condition of high speed. With the same effect, you can use faster speed to print. We upgrade auto-level system, add spring to assist the springback, with the high precision injection molding, the accuracy of the probe improved significantly.
  • We add dedicated cooling fan to fit our well-designed double duct so that the consumble can cool quickly after it is extruded. Meanwhile, it can avoid to drop down so the effect of hollow out, high-deviated print and long-distance bridge is better.

Visit The Website For More Information…