Creality 3D Printer full assembled MK8 extruder set For Ender-3/ Ender-3s/ Ender-3 Pro and other 3D printers.
Mainly including 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, heating tube, screws, gaskets, etc.
Stainless steel material nozzle throat and high quality resistance whose temperature can up to 260 °C/ 500 °F
24V high speed fan, lose heat quickly and efficiently; nozzle and tube connect seamless, prevent material leaking and blocking.
100% brand new and durable and good performance, fully assembled, you can install directly, good kit for your 3D printer.
Material: Aluminum & Stainless Steel & Brass
Installation Type: External Thread Connection
Scope of Application: 3D Printer
Package Included: 2 fans + fan covers + heat block + cooling block + nozzle + throat pipe + connector + teflon pipe + heating tube + screws + gaskets, etc.
Fan: 24V 4010 Blower Fan + 24 V 4010 Cooling Fan
Heating Cable: 1m Long, φ6*2mm, 24V 40W
Nozzle: 0.4mm Size (Brass)
Throat Pipe: M6, 27mm Long ((Built-in 40cm longTeflon)
Aluminum Heat Block Size: 20 mm * 20 mm * 10 mm
Operating Temperature Range: -40 ~ +260°C (-40 ~ +500 °F)
Item Weight: 170g/ 6oz
Package Size: 22 * 10.5 * 7.5cm/ 8.7 * 4.1 * 3in
Package Weight: 253g/ 8.9oz
1 * Full Assembled Extruder Kit
- Creality 3D Printer full assembled MK8 extruder set For Ender-3/ Ender-3s/ Ender-3 Pro and more 3D printer.
- Mainly including 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, screws, gaskets, etc.
- Stainless steel material nozzle throat and high quality resistance whose temperature can up to 260 °C/ 500 °F
- 24V high speed fan, lose heat quickly and efficiently; nozzle and tube connect seamless, prevent material leaking and blocking.
- 100% brand new and durable and good performance, fully assembled, you can install directly, good kit for your 3D printer.
Visit The Website For More Information…
Operation Voltage: DC 24V
Fit For: Creality Ender 3, Ender 3X, Ender 3 Pro
1x DC 24V Extruder Hot End Fan
1x DC 24V Turbo fan
- Easy installation and high-efficiency heat dissipation.
- Package included: DC 24V Extruder Hot End Fan and DC 24V Turbo fan
- Low noise.6000r/min rated speed
- Connector: 2 Terminal Connector with 2pin-ph2.5
- Package Included: 2 x Square brushless dual ball bearing cooling fan
Visit The Website For More Information…
● The printing is more stable: the double Y-axis motion control system drives the high-quality stable output of the two-side synchronous belt, effectively avoiding the shock caused by printing.
● Built-in motherboard power supply: According to the circuit design, device specifications and heat dissipation, the wires are concentrated in the machine for independent control.
● Design: The body is simple and generous, enhance the creative space of printing.
● Power failure continued: Automatically store the print record after power off, continue printing after power-on, and improve the model print success rate.
● Broken material detection: When the consumables are exhausted, disconnected, or other abnormal conditions occur, the printing will be automatically suspended, and printing will continue after the consumables are accessed.
● Easy leveling method: The large hand-turning nut is ergonomically designed, the leveling speed is fast, and it is free from time-consuming and labor-intensive problems.
● Industrial grade circuit board: After high load safety
Molding technology FDM
Print Dimensions ：220*220*300mm
Print speed ：≤180mm/s
Normal printing speed ：40-80mm/s
Print accuracy ：±0.1mm
Layer thickness ：p0.1-0.4mm
Nozzle diameter ：Standard 0.4mm changeable 0.2, 0.3mm
Nozzle quantity ：1
Nozzle temperature ：≤260℃
Hot bed temperature ：≤135℃
Working modes ：Online print or offline print
Power parameters ：Input:110/220V 50/60HZ output: DC24V
Machine power ：350W
Printing materials ：PLA/ABS/ TPU/WOOD/ COPPER/gradient, etc.
Filament diameter ：1.75mm
File formats STL,Odj,amf
Net Weight 11.8kg
Gross Weight 14.2 kg
Machine size 552-485*510mm
Package size 610*570*345mm
- Magnetic and heated print bed: the build plate is able to heat up to 100°C in 5 minutes and the magnetic bed allows the user to easily remove 3D printed models.
- Resume print: it is possible to pause and resume 3D prints (also works automatically in the case of a power failure).
- upgrade extruder: reduces risks of filament jamming. Furthermore, the nozzle is able to heat up to 255°C.
- LCD screen: provides the user with more control over the 3D printing process.
Click Here For More Information