BASSTOP Portable Dock Replacement Case for Nintendo Switch (Only The case, You Have to DIY with The Circuit Board chip from The Original Dock) (White)

Specially designed case to replace your original Nintendo switch dock.
Compared with the original switch dock, this replacement case is smaller, more lightweight that you can just put it into your pocket and carry it anywhere you want. You just need to scan the QR code labeled on the package and follow the video guidance to install it, and you will get the mini version switch dock which keeps all the functions of the original one. With the given screwdrivers and screws, you can finish the installation quickly

What you get:
1* Replacement case for Nintendo switch dock
2* screwdrivers
7* large screws
2* small screws

Product Features

  • Specially designed case to replace your original Nintendo switch dock ( you have to take out the circuit board chip from the original Nintendo dock and install it to this replacement case).
  • Precise cutout and more portable, the size of this replacement case is 3.78*2.69*1.15inch,you can put it in your pocket and take it anywhere.
  • Easy to install: Just scan the QR code labeled on the package and take out the circuit board chip from your original Nintendo switch dock and install it to this replacement case. You can DIY easily with our video guidance.
  • You can have a lot of fun by DIY your mini version Nintendo switch dock with this anti-scratch replacement case.
  • What you get: 1*switch dock replacement case, 2*screwdrivers and 9 screws, 12 Month 100% Satisfaction Guarantee and 24 Hour dedicated email support.

Click Here If You Need More Detailed Info…

Creality Original Ultra-Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro 3D Printer 235X235MM

NOTE:

1>This product is rated for use with PLA filaments ONLY. Any use with filaments with high shrinkage coefficients may experience malfunction or decrease in magnetic force over time. This will NOT prevent prints from warping.
2> This product is not for use with high-temperature printing applications above 70*C.

Easy removal 3D printing platform for PLA and PLA-based materials

How to use:

To use it, simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and start printing, peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top plate back into place, and you’re ready for the next round of printing.

Size:235X235MM (9.25×9.25 Inches)

Fit for Ender 3/Ender 3 pro 3d printer

Color:black

Package included:
1*Magnetic 3d printer Build Surface .

Product Features

  • ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
  • EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
  • CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
  • SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
  • UNIVERSAL: Works with all FDM printer models, and all heated and non-heated 3D printer beds.

Detailed Information available on our Homepage…

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Silicone Boots and 0.4mm Nozzle


Note: These Extruder Head Sprinkler Kit Suitable for Creality Ender 3.
More stabel temperature. Non-stick silicone sock instead of the cotton isolation is convenient.And most importantly,it offers a huge boost in temperature stability, especially if you use high flow of cooling air around the nozzle to cool the print. Silicone socks will keep the print head stay clean and prevent the filament from sticking to the heater block or spout.
These are original replacement parts for Creality 3D printer Ender 3.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) MK8 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 12V 40W

– Installation type: External thread connection
– Application: Creality 3D printers ender 3
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 24V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Cable Length:115cm
Connection Method:external line connection

Package list:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
3X Silicone Boots ( as free gift)
5x 0.4mm Brass Nozzle ( as free gift)

Product Features

  • The 3D Printer Extruder Hot End Assembled Kit are original and high quality for Creality Ender 3
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality Ender 3 3D printer.
  • 3 silicone boots and 5pcs 0.4mm brass nozzle for emergency and replacement.It’s always practice to have spare parts readily available because failures normally occur when you can least accept them and at a time where there is normally a holiday of sorts to make replacement and/or repair even more inaccessible.
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)

Visit The Website For More Information…