KINGPRINT Upgraded Replacement 3D Printer Part MK8 Extruder Aluminum Block Bowden Extruder 1.75MM Filament Reprap Extrusion for CR10/CR-10/CR-10S DIY(Red)

This modified MK8 Extruder has a filament guide tube, all screws, spare drive gear, and upgraded Bowden tube fitting, for CR-10 3D Printer.
Our design gives complete support of flexibles from the intake and output ends.
We’ve reduced the price and complexity of printing flexibles.
It will also allow to print faster with sustained quality and no risk for grinding the filament.
Color: Red / Champagne
Fit To: CR-7/CR-8/ CR-10/CR-10S
Filament : 1.75MM
Material: Aluminum Alloy

Product Features

  • Original aluminum alloy driver feed for CR-10/CR-10S/CR-8/CR-7, it is stable and durable.
  • Full metal aluminum alloy,diy aluminum block, need to assemble by yourself
  • With better stronger pressure pushing the filament into the printer nozzle
  • High Quality:Metal extruders are more resistant to corrosion than plastics with anti-rupture and better squeeze.
  • It will also allow to print faster with sustained quality and no risk for grinding the filament.

Visit The Website For More Information…

BIQU 3D Printer Part SKR Mini V1.1 32bit Control Board Marlin 2.0 Open Source Compatible with Ramps1.4/1.5/1.6 Support A4988/8825/TMC2208/TMC2100 Drivers (DC Connector)

SKR Motherboard Parameters:
Appearance size: 90*70mm
Mounting size: 80*60mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-12A
Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988
Motor drive interface: X, Y, Z, E0, Four(Serial Dual Z-axis), Up to 256 subdivisions
Display: 2.8 “TFT, 3.5” TFT
Temperature Sensor Interface:TH0、TB, two 100K NTC thermistor

Notice:
When the SKR motherboard is electricity , the red light D2 in the lower right corner will light up, indicating that the power supply is normal. The middle of the Board DC SEL is the power selection end
1, when using USB to power the motherboard, short circuit cap should be used to connect +5V and USB Pins
2, when using 12v-24v power supply, short circuit cap shall be used to connect +5V and INT pins

Attention: Can be connected [12v-24v power], [USB] at the same time , the printing process must be connected with a short circuit cap +5V And INT
3,The Board 5V SEL must be connected to INT and +5V two pins before it going to print 4,It must be connected with an external hot bed MOS Extension Module if you need to use with Heatbed, it is very significant that Motherboard can not connect with heat bed directly.

How to use
The SKR motherboard connects with the computer via the [USB] interface. After the driver is installed, the motherboard can be inserted into the computer to recognize the port for data transmission. Without the driver installed, it is easy for the computer to not recognize the USB port

1,The driver can be obtained from our open-source website: https://github.com/bigtreetech, named by “mapleDrv” file
2. After installing the driver, connect the computer and SKR motherboard with USB cable
If you need more information about this Board please contact us

Product Features

  • Using 32bit frequency 72MHz ARM Cortex-M3 series STM32F103RCT6 main Microprocessor, the performance has been greatly improved
  • Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions
  • SKR Mini V1.1 Board adopt “Gold Finish” process which capability is more stable and better heat dissipation
  • Support 2.8 and 3.5 Inch Touch Screen,2004LCD (but don’t Support 12864 LCD)

Visit The Website For More Information…

Fixed Aluminium Mount Plate For V6 REPRAP, PRUSA 3D Printer Part

This aluminum mount plate designed to be compatible with V6 and clones which are know as having different size of groove mount from the rest of other hotend brands and types. With this plate you can mount V6 on Greg Wade’s extruder.
In addition to securing hot end to the cold end, plate works as heatsink. It cools down hot end entry channel, which reduces possibility of plastic clogging due to thermal expansion.
It is 2 times lighter than solid pate, while maintaining similar strength and rigidity.

Package contents:
1 x V6 Mount Plate

Product Features

  • Can be used to mount V6 on the Wade’s Geared Extruder.
  • Very light and rigid design weighting ony18 grams.
  • Thicker plate designed to fit V6 Groove Mount
  • Made of aluminium material, durable in use
  • Size: 60*24*3(mm)

Visit The Website For More Information…