Creality 3D Printer Ender 3 Replacement Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing /4010 Cooling Fan×2/0.4 Nozzle×5 for Ender 3 / Ender 3 pro/Ender 3X

3D Printer Replacement Parts Ender 3 Hotend Extruder Heating Kit
with Capricorn Bowden PTFE Tubing XS Series
3D Printer Creality Ender 3 Pro Extruder Hot End Kit:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Capricorn Bowden PTFE Tubing:
1)Capricorn Teflon tube is well regarded as the highest quality PTFE tubing in all of 3D printing.
The tight tolerances make sure that the filament is lead directly to the hot end with as little
room for error as possible between the extruder and the hot end.
2) Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the
market which is perfect for printing exotic filaments such as ABS, Nylon, and
Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if
the hot end is heated to temperatures beyond 240*C and will get worse with higher heats.
This Capricorn XS series is safe in 3D printer usage up to 300*C thanks to its
proprietary manufacturing methods

24V Cooling and Circle fan:
Fans easy installation and high-efficiency heat dissipation;
Cooling fans with Low noise and 6000r/min rated speed;
2 Terminal Connector with 2pin-ph2.5

Package List:
1× Ender 3 Hot End Kit with Capricorn PTFE Tubing XS Series
5×0.4mm Nozzle
1× 24V Cooling Fan
1× 24V Circle Fan

Product Features

  • 2020 Upgraded Ender 3 Hotend Extruder Kit for Creality Ender 3 / Endere 3 Pro / Ender 3X
  • Creality Ender 3 replacement extruder be upgraded with Capricorn Bowden PTFE Tubing which high temperature resistant and not easy to carbonize during printing
  • Original Creality 24V 4010 Cooling Fan and 24V Circle Fan for 3D Printer Parts Ender 3/Ender 3 Pro/ Ender 3X; Fans easy installation and high-efficiency heat dissipation; Cooling fans with Low noise and 6000r/min rated speed; 2 Terminal Connector with 2pin-ph2.5
  • Creality 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend and 5 Pieces 0.4mm Nozzles for ender 3 / ender 3 pro
  • Creality 3D Printer Ender 3 Pro Extruder Hotend kit, white wire was temperature thermistor, braided wire was heating tube 24V40W

Visit The Website For More Information…

ENOMAKER Extruder Back Support Plate Upgrade with 4 Pulley New 3D Printer Parts More Stable for Creality CR-10 Ender 3 Series 3D Printer

ENOMAKER Extruder Back Support Plate Upgrade with 4 Pulley New 3D Printer Parts More Stable for Creality CR-10 Ender 3 Series 3D Printer

Pacakge Included:
1 × 4 wheels back plate 2 x copper belt ring 1 x wrench

Product Features

  • This is upgrade extruder back support plate with 4 pulley wheels.
  • Compare with 3 wheels, 4 wheels is better for heavy loading, more stable, reduce vibration, as a result, improving printing quality.
  • suitable for Creality ender 3, ender 3 pro, CR-10, CR-10S series 3d printer.

Visit The Website For More Information…

Creality 3D Upgrade Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing with Silicone Cover×3 and 0.4mm Nozzle×3 for Creality 3D Ender 3 Ender 3 pro

Please noted that the pins is clamped with long nose pliers.

Specification:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Package included:
Hot End Kit(Concluded Capricorn Teflon tube)
3*0.4mm Nozzle
3*Silicon Cover

Product Features

  • It’s 100% Creality Original.
  • Capricorn Teflon tubing -Due to its high lubricity and high-temperature resistance, it improves the printing quality and accuracy.
  • Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
  • With more terminal housing and pins as spare parts, in case fail installation and waste .
  • MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.

Visit The Website For More Information…