Befenybay 2 PCS 3D Printer Parts Diameter 8mm Z-Axis Leadscrew Top Mount for Ender-3 CR-10 Z-Rod Bearing Holder

Size :Z-Axis Leadscrew diameter 8mm
Color :Black
Material:Plastic
Fit 2020 series Aluminum extrusion
Package:2 pcs Z-Axis Leadscrew Top Mount
4 pcs M4 T Nuts
4 pcs M4x20mm screws

Product Features

  • 【Material】 Z-Rod Bearing Holder is made of plastic
  • 【Widely Used】widely used in Creality CR-10, Ender 3 etc
  • 【Dimensions】Length: 46mm. Width: 39mm. Height: 17mm
  • 【Function】 Diameter 8mm Z-Axis Leadscrew Top Mount for 3D Printer
  • 【Package Include】2 pcs Z-Rod Bearing Holder, 4pcs M4 T Nuts, 4pcs M4x20mm screws

Visit The Website For More Information…

FYSETC 3D Printer Heatbed Parts, Solid Bed Mounts, OD 0.63 in ID 0.16 in Stable Hotbed Tool Heat-Resistant Silicone Buffer for Creality CR-10 Ender 3 Bottom Connect, 4 Pcs

FYSETC is focus on 3D Printing Accessories, offers a variety of quality 3D Printing parts. We are constantly improving its products to deliver the best experience to each customer.

The silicone buffers are simply installed instead of the wobbly springs. It is stable and does not shake when used, better to keep your 3D printer leveled.

Model: 3 high and 1 short silicone leveling column, brown

Feature: Assist 3d printer leveling

Material: Silicone

Silicone: Heat-resistant and pressure-resistant

Diameter: OD 0.63″(16mm) ID 0.16″(4mm)

Height: High 0.71″(18mm), Short 0.64″(16.2mm)

Package Includes:

3x high silicone leveling column, brown

1x short silicone leveling column, brown

After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to email or Q&A us, we will try our best to service you.

Product Features

  • These are solid bed mounts for the CR-10, Ender 3. They are intended to replace the springs under the heated bed. two firmware are needed. Ender 3 has contained the spacers, so you don’t need to print the necessary parts, you just need to adjust the limit switch module’s height, If your printer is CR-10, need to print the necessary parts, reference files in thingiverse, keywords: CR-10 Solid Bed Mount.
  • Model is 3 high and 1 short, black(don’t include Print firmware). Please Note: before install, you need to print two firmware( please search “3742788” in Thingiverse to have it), Automatic leveling sensor is need. Please reference Picture.
  • These silicone buffers serve to replace on your heating bed original springs and it is no longer possible movement, your set levels remain!
  • This heat-resistant and pressure-resistant silicone leveling column with a 4mm inner diameter makes it easier to level your 3D printer.
  • New upgraded 3d printing leveling tool with two different colors to choose.

Detailed Information available on our Homepage…

BIGTREETECH Direct SKR V1.4 Turbo Control Board + 5pcsTMC2208 V3.0 UART Mode Driver 3D Printer Parts with LPC1769-120MHz Frequency VS SKR V1.3 / V1.4


※5.【TMC2208 V3.0 Manual】:
https://github.com/bigtreetech/BIGTREETECH-TMC2208-V3.0

※BIGTREETECH SKR V1.4/V1.4 Turbo GitHub:
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

※【SKR Motherboard Parameters】 :
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM Cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Logic voltage:DC 3.3V
WIFI module:ESP-01S
Motor driver: Support TMC5161、TMC5160、TMC2209、TMC2225、TMC2208、TMC2130、ST820、LV8729、DRV8825、A4988 etc., independent external motor drive.
Driver working mode support: SPI、UART、STEP/DIR
Motor driver interface:X、Y、Z、E0、E1,5 way(Each has a closed loop drive interface) up to 256 subdivisions
Temperature sensor interface: TH0, TH1, TB, 3 channel 100K NTC Temperature

※BIGTREETECH SKR V1.4 motherboard is a 32-bit 3D printer motherboard optimized and upgraded by the 3D printing team of
Shenzhen Big Tree Technology CO., LTD. for the deficiencies of V1.3 version, especially suitable for small and medium-sized printers.

※1.SKR Motherboard Features: :
1)Plug-in external DC5V power supply module to supply power to TFT screen, BL touch and Neopixel.
2)Equipped with highly modular and open source firmware Marlin2.0, which is convenient for users to DIY and secondary development;
3)More fan interfaces: 1 way CNC fan, 3 way normally open fan;
4)Support 2.4, 2.8, 3.5 inch color touch screen, support LCD2004 screen, LCD12864 screen;
5)Upgrade and configure the firmware through SD card, which is simple, convenient and efficient;
6)The thermistor interface is protected by a bile capacitor pressurized resistor to enhance the resistance of the interface;
7)Support Resume Printing While Power Off, Filament Break Detection,Automatic Shutdown After Printing and so on;
8)High performance MOSFET tube, better heat dissipation effect;

Product Features

  • ※1.【SKR V1.4 Turbo】: Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved;
  • ※2.【SKR V1.4 Turbo】: Using dedicated power chip M6130, support 12-24V power input;
  • ※3.【SKR V1.4 Turbo】: Double z-axis interface, eliminating the trouble of external drive expansion module;
  • ※4. 【TMC2208 Ultra-quiet】: Stealth Chop can make the engine work in extreme silence
  • ※5.【TMC2208 V3.0 Features】: Working Mode: Dir Step ##Microplver: 1/256 ##Microplyer Mode: Up to 256 ##Driver Current: Up to 2A ##Input Voltage: 4.75-35VDC ##Logical Voltage: 3.3V-5V ##Decibel: <10dB ##RDSON: ≤0.3Q ##Motor Phase Current: 1.2A RMS, 2.0A Peak

Visit The Website For More Information…