Gizmo Dorks 3D Printing Platform Blue Tape 12″ x 12″ (10 Pack)

Gizmo Dorks blue painter’s tape is the go-to and cost effective way of covering your 3D printer bed plate. Plastic filament such as ABS or PLA stick well to this tape while also being forgiving enough to let go when your print is finished. The tape is easy to apply and remove, with strong adhesion. The tape is 6.25 inches wide, so you don’t have to worry about stringing small 1 inch wide tapes together to form zig-zag rows. For most printer beds, you’ll only need one sheet. Say goodbye to the lines on the print bottoms from multiple pieces of tape. There are a host of different sizes to choose ranging from 6×6 to 12×12 and a few sizes in between. These sheets can be easily trimmed with scissors as well.

Product Features

  • 3D printer blue tape is designed to create an optimal adhesion for the first layer of your print
  • Print most 3D filament types such as ABS and PLA with easy removal of the printed part
  • Printed parts come off cleanly without any messy or ugly lines on the bottom of the print
  • Easily apply the precut sheets to the printing platform and use a straight edge to lay down the tape without any bubbles
  • These 3D printing blue tape sheets come in a pack of 10 and are 12 x 12 inches

Detailed Information available on our Homepage…

ANYCUBIC Ultrabase 3D Printer Platform Tempered Glass Plate Durable Build Surface for Large Print Size 310x310mm

What printing experience was brought by Ultrabase?
Watch the video to find What has been bougth to us by Ultrabase.
Fly to:https://www.youtube.com/watch?v=639Qwo2wNjg&feature=youtu.be

How to assemble the Ultrabase platform:
Just peel off the blue tape on the backside, and then fit the Ultrabase to the hotbed (base).
Please visit our official website: www.anycubic3d.com
or Youtube channel :www.youtube.com/watch?v=zDup0gp9pLA for assembly video

Attention:
* Suggested bed temperature may vary depends on the filament material;
* Please properly level the bed before printing;
* Never let the nozzle rub against the Ultrabase directly;
* Clean the platform surface with alcohol/water.

Temperature settings for different filaments:
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended )
4. PC:100-130℃ ( 120℃ is recommended )
5. Nelon:90-120℃ ( 110℃ is recommended )
6. PP:100-130℃ ( 120℃ is recommended )
7. PETG: 50-70℃

Ultrabase Specification:
Material : Special Glass + microporous coatings
Item size : 310*310*6mm
N.W :600g
G.W :720g
Package List:
1x ANYCUBIC 310*310Ultrabase 3D Printer Platform

Product Features

  • Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
  • Good Flatness: Ultrabase is glass-based and the critical tolerance is ±0.2mm. (normally within the 0.1mm range).
  • Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400℃.
  • Easy to clean: Ultrabase is easy to clean by alcohol/water.
  • Compatibility: Anycubic 310*310Ultrabase compatible with large size printer like for CR-10,Upgrade your printer with Ultrabase! You can get full support from ANYCUBIC Team.

Click Here For More Information

WINSINN Leveling Spring Component – M3 Screw Knob – For 3D Printer Hot Bed / Platform (Pack of 4set)


►This kit is For 3D Printer Hot Bed / Platform

►Material: Screw – 304 Stainless Steel Spring – 304 Stainless Steel Knob – High quality Coppor

►Screw size: M3*40mm Spring size: 1.2*7.5*21.5*8mm (Wire diameter: 1.2 mm / Outside diameter: 7.5mm /Inner diameter: 5.2mm / Height: 21.5mm / Laps: 8 laps) Knob size: As picture show

►1Set = 1Pcs Screw + Spring + Knob

—————————————————————————————————————

Package include:
►4 x 304 Stainless Steel M3*40mm Screw
►4 x 304 Stainless Steel 1.2*7.5*21.5*8mm Spring
►4 x High quality Coppor Knob

►We offer the best products and services, if there has any problems, you can tell us anytime. Thank you:))

Product Features

  • For 3D Printer Hot Bed / Platform
  • Material: Screw&Spring – 304 Stainless Steel / Knob – High quality Coppor
  • Screw size: M3*40mm / Spring size: 1.2*7.5*21.5*8mm
  • 1Set = 1Pcs Screw + Spring + Knob
  • Made by WINSINN

Detailed Information available on our Homepage…