- 【High Precision】: With this printer resin, printed parts will have high detail with no deformation or noticeable shrinkage and the final cured pieces are strong without being brittle.
- 【Quick Curing】: The UV resins can be rapid prototyping, developed to reduce the forming time.
- 【Rigid & Toughness】: This LCD resin Have good combination of hardness and toughness, which brings easy removal of the model and fine printing details.
- 【Excellent Fluidity】: Able to quickly infiltrate models and cure them into shapes, and tend to be making clean up and post-processing finished pieces much easier.
- 【Well Packed】: The SLA resin bottle comes packaged safely in bubble wrap and cap are completely intact, surrounded by a tight-fitting air pillow. No worries for leakage.
Click Here For More Information
Some features of the X5SA PRO:
1,3.5-inch touch screen – clear and convenient, easy to operate 2, detachable aluminum plate – take the model more convenient, save trouble
Parameters of the X5SA PRO: Print parameters
Print principle: FDM (Fused deposition molding)
Print size: 330× 330×400 (mm3)
Print accuracy: 0.1-0.4 mm
Positioning accuracy: X/Y 0.0125mm，Z 0.002mm Nozzle quantity: 1
Nozzle size: 0.4 mm
Print speed: 20~100mm/s (suggest 60mm/s)
Moving speed: 100mm/s
Filament: PLA, TPU, ABS, wood, pc,HIPS, wooden filament etc.
Environmental temp: 8℃ – 40℃
Nozzle temp: Max260℃
Heat bed temp: support
Slice software: Cura
Input format: .STL .OBJ
Output format: GCode
Connection: SD card, USB cable(Suitable for skilled users)
Power input: 110V/220V AC, 50/60Hz
Power output： 24V/15A DC
Machine size: 580mm×645mm×660mm
Machine weight: ~14.5kg
After-sales: the main parts of the motherboard and power supply are guaranteed for 6 months, and the other parts are guaranteed for 1 year. If you have any questions, please email us at the after-sales department: [email protected] or [email protected]
- Industrial Linear Guide design—— ultra-high precision, super stability, long service life, Print sze:330×*330*400mm/ 13*13*15.8inch,
- Titan extruder—— able to print flexible consumables, more choice of consumables
- 30P integrated cable and 24V power supply——30P integrated cable wiring is simple and convenient, and the appearance is more tidy. At the same time, the 24V power supply makes the hot bed warm up faster and the temperature is more stable
- Three Important Features——-1)Automatic Leveling, help avoid a lot leveling troubles.2)Resume Printing after Power Off.3)Filament run out detection, When the filament runs out or disconnected, the printer will automatically suspended to ensure the model can be smoothly printed
- After-Sales Service—–TRONXY will offer lifetime technical support and give satisfactory response to you. For the jet lag or Chinese New Year holidays etc, we may not be able to respond to you in time during those special periods, but we can guarantee that we will reply to it within 24 hours under normal conditions. Please wait patiently, don’t rush to give us a bad review. Your trust will give us biggest motivation
Click Here For More Information
ELEGOO photopolymer resin is a type of polymer that changes its physical properties when introduced to light. In the case of 3D printing , these are typically liquid plastic resins that harden when exposed to a light source, which works perfectly with our Photocuring resin
Usage condition :
1) Shake up the bottle before use and avoid direct sunlight and dusty environment
2) Do not drink it and keep it out of the reach of children
3) Please wear a mask and gloves when using to avoid direct skin contact and maintain indoor ventilation
4) If you got skin contact please wash away with waters immediately and if you feel discomfort please see a doctor ASAP.
5) Once the model is complete, please wash it with high 95% degree or higher ethanol alcohol for 30 seconds at least
6)If you don’t use the resin please do not leave them in the resin tank over 48 hours or put them back to its original bottle and seal it.
Material Properties :
Curing wave-length: 405 nm
Hardness: 79.0 D
Shrinkage: 7.1 %
Viscosity (25°): 552.0 mpa.s
Liquid density: 1.100 g/cm³
Solid density: 1.184 g/cm³
Tensile strength: 23.4 Mpa
Elongation at break: 14.2 %
Curing time: 6-10 s
Color option: Grey, White, Green, Black, Transparent, Yellow, Blue, Red
Shelf life: 1 year
- 【Low Shrinkage and High Precision】ELEGOO photopolymer resin is specially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish.
- 【Fast Curing and Great Stability】ELEGOO 405nm Rapid Resin was designed to significantly reduce printing time with its excellent fluidity. Meanwhile its great stability and proper hardness guarantee a worry-free printing experience and successful printing.
- 【Bright and Stunning Colors】: With high quality pigments and photo-initiators inside ELEGOO UV-Curing resin, the models printed with resin have a very pure and stunning color effect just like an artwork.
- 【Wide Applications】Given the outstanding performances, ELEGOO standard resin is suitable for most DLP/LCD 3D printers. Works best with the LCD 3D Printers.
- 【Safe and Secure Packaging】Leak-proof bottle fully wrapped with a plastic bubble bag and exquisite designed package box make sure the resin stays in place where they belong
Check Out Our Website For Details…