Creality 3D Upgraded BLTouch V1 Auto Bed Leveling Sensor Kit Accessories for Creality 3D Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro

NOTE:
The circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual, while Ender 3,Ender 3 Pro,Ender 5, CR-10 are same as the manual.
1. Use USB cable to connect CR-10 S4, CR-10 S5, CR 20, CR20 Pro with computer to flash the firmware, the ISP connector and ISP pinboard are not needed.
2. No need to plug the pinboard A to mainboard of CR-10 S4, CR-10 S5, CR 20, CR20 Pro, just insert the connectors into the mainboard D11 pins and unplug Z limit switch then insert the connectors into the Z port.

Features:
An auto leveling sensor for 3D Printer based on open-source
Simple, high-quality, smart and precise

Item type:Auto Press Bed Leveling Kit
Material: Plastic
Color: As pictures.

Packing Includes:
1 set of auto bed Leveling Kit

Firmware:
Please move to the Creality Official Website to download.

Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures.
2. Please allow 1-3cm measuring deviation due to manual measurement.
If the BL touch doesn’t work well. you can reference the website: www.antclabs.com/wiring3

After sale service and technical support
If you have any issue, please kindly contact us. We will reply as soon as possible within 24 hours.
We will offer you professional customer support and strive our best to offer your solutions.

Product Features

  • Application: Suitable for Ender 3/Ender 3 Pro,Ender 5, CR-10/10 S4/10 S5, CR 10S, CR 20/20 Pro (can’t use for CR 10S Pro). It is an auto leveling sensor for 3D Printer based on open-source.
  • IMPORTANT NOTE:Flash the firmware before install, and the circuit wiring of CR-10 S4, CR-10 S5, CR 20, CR20 Pro are different from the manual(please check the product image to see detail). Please visit the Creality Official Website to download firmware.
  • Easy to Use: This auto bed leveling sensor make it easier to leveling the hot bed, which can precisely measure the tilt of Bed surface. Bed leveling is not a problem anymore.
  • Intelligence, self – check and alarm. Function of auto leveling is adopted to make it easier to use and to increase the success rate of shaping.
  • Package includes: 1 set of auto bed Leveling Kit (as image shows). If you have any question about this product, please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.

Click Here If You Need More Detailed Info…

Creality Original 3D Printer Straight PC4-M6 Pneumatic Fitting Push to Connect + PC4-01 Quick in Fitting for CR-10,10S,S4,S5, CR-10S Pro,Ender 3,Ender 3 Pro Series Printer (Pack of 10)

It’s Creality Original perfect fix Ender 3 and CR-10S Series 3D Printer

Package included:
5 x PC4-M6 Fittings +5 x PC4-01 Fittings

Product Features

  • PC4-M6 Fittings:thread M6/3mm, inner diameter 4mm, fit for the tube whose outer diameter is 4mm
  • PC4-01 Fittings:thread about 1/8, The upper parts can be inserted into 4MM pipe and self locking,the lower screw thread is 1/8 teeth
  • PC4-01 Fittings:Silver; PC4-M6 Fittings; Gold
  • Notice:These 3D printer accessories are small parts. Please keep them away from children to avoid swallow risk.

Visit The Website For More Information…

Creality 3D Printer Upgrade kit with Capricorn Premium XS Bowden Tubing, Metal Feeder Extruder Frame and Die Spring for Ender 3,Ender 3 Pro,Ender 5,CR-10/CCR-10S,S4,S5

Specification:
Capricorn Premium XS bowden Tubing
ID: 1.95mm ± 0.05mm
OD: 4.0mm

Die Spring:
Loading grade: Light Load
Material: Metal
Size:hole diameter(OD): 0.31″/ 8mm; rod diameter(ID): 0.16″/ 4mm; Length: 0.98″/ 25mm

Package included:
1 x1M Capricorn Premium XS bowden Tubing
1 x MK8 extruder drive feed kit
4 Pcs Die springs

Product Features

  • Original Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5,Ender 3, it is stable and durable.
  • Creality Capricorn XS Series Low Friction PTFE Bowden Tubing 1 Meters for 1.75mm Filament
  • 8mm OD 25mm Length Compression Mould Die Springs Light Load for Heated Bed Ender 3 CR-10 CR-10Mini CR-10S/S4/S5 Series 3D Printer
  • Suitable for 1.75mm filament
  • Customer Service – If you have any problem or question for our product,please feel free to contact us. we will do what we can do to help

Click Here If You Need More Detailed Info…