3D Printer Adhesive Glue by Layerneer, Bed Weld Original, Strong Grip Reduces Warping for ABS, PLA, and PETG Filament on Heated Build Plates, 4 oz.

Do you have trouble with parts warping or coming detached from the printer bed?

Have you struggled with part removal after printing is finished?

Introducing BED WELD – ORIGINAL™

BED WELD was engineered to solve these challenges by enhancing your print surface so that it grabs hold of that critical first layer when your build surface is hot, and refuses to let go with its gecko like grip. In many cases you can often print without rafts or build plate adhesion layers, saving you time and material.

Once your part is finished the coating dynamically morphs as your printer bed cools, releasing its hold so you don’t have to wrestle to get your part off.

No more chipped glass or broken parts. In most cases, your part will fully detach without the need for tools. In the event the part does remain attached it normally takes just a simple lifting of a corner using the edge of a razor as a lever, and the part easily pops off.

BED WELD comes with a unique built-in applicator that makes applying the coating a simple no mess process. The coating dries quickly to form a thin film that is not sticky, so there is no risk of getting a clogged nozzle or having residue on your finished part.

NOTE: The BED WELD coating was designed for use with heated build plates made from glass or aluminum and was optimized to work with PLA, ABS, PETG, PVA, and CPE filament types. Not recommended for use with Nylon, PP, or TPU 95A. See image for compatibility summary. Applying to build plates that have other surface coatings, such as magnetic build plates, or tape, is not recommended.

BED WELD is backed by an unconditional 90-Day money back manufacturers guarantee, so you risk nothing!

Product Features

  • THERMAL DYNAMIC COATING – No magic, just science; Parts stick at hot and release when cooled; Dries fast and non tacky so it won’t clog your nozzle with goo
  • LONG LASTING – Print several times on a single coat; recharge with a wet sponge to get more prints out of a single application; Cost pennies per print
  • LOW ODOR & WATER SOLUBLE – No harsh smells; No headaches; Easy to touch up or remove with water
  • NO-MESS APPLICATOR – Built in foam tip makes applying the coating to your build plate surface simple and it won’t accidentally spill
  • 90-DAY MANUFACTURER GUARANTEE – If this solution does not work for your 3D printing application, you have a FULL 3 MONTHS to contact us for a 100% money-back refund

Detailed Information available on our Homepage…

Researchers use 3D printing to create patch that reduces heart failure

Researchers from the University of Alabama at Birmingham (UAB) and the University of Minnesota have developed a method to grow heart tissue that can reduce the likelihood of heart failure after a heart attack using 3D-printing technology.

The study, published in Circulation Research, was led by Jianyi “Jay” Zhang, MD, PhD, the chair of the department of biomedical engineering at the UAB, and Brenda Ogle, PhD, an associate professor at the University of Minnesota.

To grow the heart tissue, they seeded a mix of human cells onto a one-micron-resolution scaffold that they made with a 3D printer. Once in the scaffold, the cells formed into a “muscle patch,” or engineered heart tissue, that synchronously beats in culture.

The patch is designed to help regenerate muscle tissue after a heart attack since the heart cannot do it alone. Because remaining dead tissue can strain surrounding muscle and increase the likelihood of heart failure, the patch could help in preventing another heart attack.

The scaffold was seeded with a mix of 50,000 cardiomyocytes, smooth muscle cells and endothelial cells from human stem cells. The patch began beating within one day of seeding and continued to get stronger in following weeks.

In mouse studies, the muscle patch was surgically placed after a heart attack. Results showed significant improvement in heart function and a decrease in the amount of dead heart tissue. Cardiac function, blood vessel density and cell proliferation also improved.

“Thus, the cardiac muscle patches produced for this report may represent an important step toward the clinical use of 3D-printing technology,” the authors wrote in the study. “To our knowledge, this is the first time modulated raster scanning has ever been successfully used to control the fabrication of a tissue-engineered scaffold, and consequently, our results are particularly relevant for applications that require the fibrillar and mesh-like structures present in cardiac tissue.”

Maintenance Lube for 3D Printer and CNC Machine Fully Synthetic Oil w/ PTFE Reduces wear, friction and noise Lube3D

Lube 3D is the first and so far only Maintenance Oil specifically for 3D Printers and other CNC machines. This offer includes a 1 Oz bottle of Lube 3D with a locking safety cap and has a small droplet applicator built in. The content of this bottle will last you more than one year even if you apply Lube 3D every week! This Oil is fully synthetic and uses PTFE (Teflon (R)) particles for best lubrication properties for metal on metal friction. This helps in reducing noise and wear on linear bearings, lead screws, and any other metal-to-metal and metal-to-plastic friction application. It is advised to clean the guide rods and lead screws of your 3D printer and other CNC equipment every 7-14 days of active use, but at least once a month! Application Procedure: Clean up: If you see dust and debris sticking to you guide rods, use a soft cloth or a paper towel to remove dirt gently. 1. Apply a few drops of Lube 3D on both sides of the linear bearing and male and female parts of your lead screw assembly. 2. Be careful to apply a small amount of Lube 3D, don’t let it drip into your machine. 3. Move the bearing or lead screw slowly over the freshly applied lubricant. Ideally, the lubrication film is so thin that you can only barely see it. 4. Remove any oil drips 5. Repeat every 7-14 days or when necessary

Product Features

  • First Lubricant Specifically for 3D Printers and CNC Machines
  • Fully Synthetic High Viscosity Oil with Suspended PTFE Particles
  • Non-Toxic, Non-Corrosive, Waterproof, Food-Grade
  • Easy Application with Built-in Droplet Applicator in Bottle
  • Safety Cap to Reduce Risk of Accidental Opening and Tampering

Detailed Information available on our Homepage…