3D Print Removal Accessories– 3 Piece 3D Printing Removal Tool Kit – Tools to Remove Models from 3D Printers

Samsung Galaxy Screen Protector ,Tempered Glass Screen Protector for Samsung Galaxy

Product Features

  • EASY REMOVAL: Our tool kit ensures that you can easily lift – not pry – your models from the 3D printer print bed every time.
  • NO DAMAGE: The accessories allow fast and efficient removal of your 3D prints without damaging either the model or the print bed.
  • 3 PIECE KIT: The 3D printing tools are designed to be used either separately or together to gently lift your prints, however small, large or delicate.
  • TOUGH & DURABLE: The high quality wooden handles are pinned to the blade to keep them firmly in position, for reliable results however tough your 3D print removal!
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing supplies of the highest quality. If there are any problems with your Removal Tool Kit just let us know!

Detailed Information available on our Homepage…

3 Rolls Premium 3″ in x 60 yd USA PRO Grade Professional Blue Painters Tape Masking Trim Edge Clean Release Easy Removal NO RESIDUE (72MM x 55M 2.82 inch). 3D Printer bed deck cover 3D Print Removal

3D printing enthusiasts will LOVE this tape! Cover your printer bed deck for easy removal of prints and replace tape easily as it wears. 3D printers do not come with good surfaces for easy print removal.

This Blue Painters Tape is Professional Grade multi-use Contractors tape featuring a specially formulated, high tack adhesive. Works for textured, semi-rough, or smooth surfaces and has the tackiness it needs to adhere to your surfaces yet allows for clean removal up to 21 days.

High performance masking tape is for general industrial, construction, and do-it-yourself use. The acrylic adhesive system will not dry out or lose holding power. Works well on drywall, glass, hardwood floors, wood trim, and a variety of surfaces. Most typical use is LATEX paint jobs and window protection mask off.

(REMOVE SLOWLY and carefully from freshly painted surfaces!)

Very Important: Surfaces must be well cleaned, dust free, greaseless, and very dry before application. While the backing of the tape is moisture resistant the adhesive is definitely not. ALL adhesive is pressure & heat sensitive. Make sure you press it firmly after application. Apply at room temperature or above if possible. The dryer and warmer the installation area, the more you run your fingers over it, the better the adhesion (less bleed). REMOVE ASAP! (always pull gently at slight angle AWAY from painted edge) Painters tape is known as semi-permanent removable, it gets stronger every day. The longer you leave it on the more difficulty removing it. Rolled or brushed paint jobs require much sooner removal than sprayed.

Blue Painters Tape is not for everything! May not play well with all types of oil based paints, lacquers, etc. You must be willing to experiment, there are 100’s of kinds of tape for a reason.

Other uses: 3D print bed masking or printer deck covering, Glue or Caulk lines, Over spray protection, Chrome protection when cutting or grinding.

Product Features

  • Premium #1 Grade USA MADE Product – Thicker paper, Stronger adhesive for Contractors & Pros
  • 6 Mil High Tack creped backing, 22.0 steel adhesion, 20 lb tensile strength, 9% elongation
  • UV Resistant for 10 days up to 150 degrees outdoors, 40-125 indoor range for 21 day clean removal
  • 3D Printer bed print surfaces – Strong, flexible, durable, versatile – broad range of applications
  • Dispenser friendly, Pulls off roll VERY quick without tearing, needs LESS pressure to stick down.

Click Here For More Information

Multifunctional Hot Bed Knife Spade 3D Print Removal Spatula Stainless Steel Blade Rubber Handle 3D Printer Accessories

Features:
Soft rubber handle and steel knife.
The edge is sharp, the edges are fillet protected, reducing the damage to stickers and hot beds.
Can help you easy get the prints off from the build surface.
It will not scratch build surface. 
An essential addition to your 3D printer tool kit.

Descriptions:
High quality stainless steel, heat treatment, high hardness, good elasticity, durable and durable.
Rubber handle is anti slip for comfortable grip.
Compact and light, portable to carry.

Specifications:
Material: TPR rubber and steel
Size: 204*75*20mm
Color: yellow & black

Package included:
1 x 3D Printer Spatula 

Notes:
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3cm deviation.Thanks!

Product Features

  • Soft rubber handle and steel knife.
  • The edge is sharp, the edges are fillet protected, reducing the damage to stickers and hot beds.
  • Can help you easy get the prints off from the build surface.
  • It will not scratch build surface.
  • An essential addition to your 3D printer tool kit.

Detailed Information available on our Homepage…