2 Pack 3D Printer Glass Print Bed for Ender 3-235 x 235 x 40mm – 8 Printer Bed Clips Included – Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro Tempered Glass Replacement

This listing is for a 2 pack of 3D Printer Beds made from tempered glass. The tempered glass is of superior quality to typical borosilicate plates
provided by our competitors. The tempered glass is totally flat and smooth, with no dips or pits. Tempered glass is more durable and lasts longer
than borosilicate, so you need to replace the plates less frequently. 

Unlike our competitors, you won’t have to purchase low quality black binder clips to secure the plates. We provide 8 printer bed clips that maximize
your build area and look great. 

Key Product Features:

  • Made from high quality tempered glass. 
  • Are you looking for an Ender 3 Upgrade? Perfectly fits the Ender 3, Ender 3 Pro, Ender 3X, Ender 5, CR-20, Geeetech A10, and CR-20 Pro at
    235 x 235 x 40 mm. 
  • Totally flat surface to avoid any adhesion or print quality issues.
  • Packed in custom foam to avoid any damage during delivery. 
  • 8 custom printer bed clips included. 

How to Calibrate Your New 3D Printers Glass Bed

  1. Load the glass plate into the 3D printer base and attach with the silver clips provided.
  2. Center both the bed and nozzle.
  3. Lower the nozzle until it touches the top of the glass bed. 
  4. Readjust the Z axis homing switch. 
  5. Loosen the switches and reposition. 
  6. Tighten up the switches when correctly aligned. 
  7. Carry out a print calibration check to re-adjust the bed. 

Product Features

  • 3D PRINTER PARTS AND ACCESSORIES: This listing is for a 2 pack of 3D Printer Beds made from tempered glass. 8 custom printer bed clips are also included. The 3d printer heatbeds are securely packed in custom foam. This means they won’t arrive shattered or cracked.
  • WIDE RANGE OF COMPATIBILITY: These 3D Printer Bed Plates are compatible with Creality Ender-3, Ender-3 Pro, Ender-3X, Ender-5, CR-20, CR-20 Pro, Geeetech A10, and any other 3D printers requiring a 235x235mm print bed..
  • PRINTER BED CLIPS INCLUDED: You will no longer need to use ugly black binder clips. Not only are they poor quality, but they limit the build area. The clips included with this 3D printer surface look great and maximizemaximise your build area.
  • PERFECTLY FLAT 3D PRINTER PLATFORM: Using a rivals inferior quality 3D printer hot bed that isn’t perfectly flat can cause adhesion and print quality issues. With our tempered glass sheet you never have to worry about these problems.
  • TEMPERED GLASS PLATE: The tempered glass is of superior quality to typical borosilicate plates provided by our competitors. The tempered glass is totally flat and smooth, with no dips or pits. Tempered glass is more durable and lasts longer than borosilicate, so you need to replace the plates less frequently.

Detailed Information available on our Homepage…

Glarks 29Pcs 3D Printer Nozzle with Nozzle Replacement and Cleaning Tool Kit, Including 0.2mm,0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm Extruder Head Nozzle, Cleaning Needle, Nozzle Change Tool, Tweezer

Glarks 29Pcs 3D Printer Nozzle with Nozzle Replacement Tool Kit, 7Pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm Brass Nozzle and 18Pcs Cleaning Needles and 3Pcs Nozzle Change Tool with Tweezer

♣【Specification:】
✈ Extruder nozzle material: Brass
✈ Nozzle thread: M6
✈ 7mm screw socket fit for E3D nozzle
✈ 17mm wrench fit for 16x16mm heat block

【Package Include:】
17mm flat wrench x 1
Dual head socket wrench x 1
7mm socket x 1
Handle x 1
0.2mm extruder nozzle x 1
0.3mm extruder nozzle x 1
0.4mm extruder nozzle x 2
0.5mm extruder nozzle x 1
0.6mm extruder nozzle x 1
0.8mm extruder nozzle x 1
0.2mm cleaning needles x 2
0.4mm cleaning needles x 10
0.6mm cleaning needles x 2
0.8mm cleaning needles x 2
1mm cleaning needles x 2
Tweezer x 1
Total Quantity: 29Pcs

【How to change the nozzle: 】
✿ Prepare the nozzle, spanner, wrench.
✿ Heating. Turn on the 3d printer, set the nozzle temperature to target (PLA: 80-220, ABS: 240-280).
✿ Removing. After the heat done, use spanner to hold the heat block firmly, then use the wrench to screw old nozzle out.
✿ Adding. Put new nozzle to the socket and screw nozzle in, make sure the screw in tight and the work done.
✿ Warm Prompt: When heating, the old nozzle will be very hot, please do not touch them by hands.

【Quality Assurance:】
If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time.

Product Features

  • ★【What You Get:】In this 3d printer tool set, it include 1pc flat wrench, 1pc dual head wrench, 1pc 7mm socket, 1pc handle, 6pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm brass nozzles, 18pcs 0.2mm, 0.4mm, 0.6mm, 0.8mm, 1mm cleaning needles, 1 tweezer total 29pcs are well packed in a case.
  • ★【Extruder Nozzle:】Come with 6pcs 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm nozzles, high quality brass material, m6 thread. Compatibility for Anet A8, Creality CR-10, Tevo Tarantula, MK8 makerbot, duplicator, prusa i3 and reprap printer.
  • ★【Pratical Wrench:】Set include 1 flat wrench which open mouth width is 17mm, a 7mm socket fit for E3D nozzle, a mini socket wrench and a handle for you to change out a nozzle. They will fimly hold and without damage to the heat block, no yanking on frail wiring.
  • ★【Cleaning Needles:】Come with 18pcs 0.2mm, 0.6mm, 0.8mm, 1mm cleaning needles, each for 2pcs, 0.4mm for 10pcs. They are stored in 2 round tube. Which are used for cleaning 3D Printer nozzles and solve the filament clog problem, remove excess filament quickly.
  • ★【Quality Assurance:】If you receive a defective product or have any problems during use, please feel free to contact us, we will provide return and exchange service at any time.

Click Here If You Need More Detailed Info…

Creality 3D Printer Ender 3 Replacement Parts Assembled Extruder Hotend with Capricorn Bowden PTFE Tubing /4010 Cooling Fan×2/0.4 Nozzle×5 for Ender 3 / Ender 3 pro/Ender 3X

3D Printer Replacement Parts Ender 3 Hotend Extruder Heating Kit
with Capricorn Bowden PTFE Tubing XS Series
3D Printer Creality Ender 3 Pro Extruder Hot End Kit:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range: -40 ~ +260°C (-40 ~ +500 °F)

Capricorn Bowden PTFE Tubing:
1)Capricorn Teflon tube is well regarded as the highest quality PTFE tubing in all of 3D printing.
The tight tolerances make sure that the filament is lead directly to the hot end with as little
room for error as possible between the extruder and the hot end.
2) Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the
market which is perfect for printing exotic filaments such as ABS, Nylon, and
Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if
the hot end is heated to temperatures beyond 240*C and will get worse with higher heats.
This Capricorn XS series is safe in 3D printer usage up to 300*C thanks to its
proprietary manufacturing methods

24V Cooling and Circle fan:
Fans easy installation and high-efficiency heat dissipation;
Cooling fans with Low noise and 6000r/min rated speed;
2 Terminal Connector with 2pin-ph2.5

Package List:
1× Ender 3 Hot End Kit with Capricorn PTFE Tubing XS Series
5×0.4mm Nozzle
1× 24V Cooling Fan
1× 24V Circle Fan

Product Features

  • 2020 Upgraded Ender 3 Hotend Extruder Kit for Creality Ender 3 / Endere 3 Pro / Ender 3X
  • Creality Ender 3 replacement extruder be upgraded with Capricorn Bowden PTFE Tubing which high temperature resistant and not easy to carbonize during printing
  • Original Creality 24V 4010 Cooling Fan and 24V Circle Fan for 3D Printer Parts Ender 3/Ender 3 Pro/ Ender 3X; Fans easy installation and high-efficiency heat dissipation; Cooling fans with Low noise and 6000r/min rated speed; 2 Terminal Connector with 2pin-ph2.5
  • Creality 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend and 5 Pieces 0.4mm Nozzles for ender 3 / ender 3 pro
  • Creality 3D Printer Ender 3 Pro Extruder Hotend kit, white wire was temperature thermistor, braided wire was heating tube 24V40W

Visit The Website For More Information…