BCZAMD 12V 50W Upgraded Ceramic Cartridge Heater Wire 1M 3D Printer Accessories Heating Tube 620mm for Reprap Prusa Mendel i3 MK3 MK10 Maker Select V2 3D Printer Parts V6 Hotend J-head Extruders, 3Pcs

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350 degrees

Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.

Package listing:
3 x 12V 50W Ceramic Cartridge Heater

Product Features

  • Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
  • The improvement compared to ordinary red heating tube:
  • 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
  • 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
  • 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.

Visit The Website For More Information…

[4-Pack] TL-Smoother Plus addon Module for 3D Printer Accessories Filter for Pattern Elimination Motor Filter Clipping Filter 3D Motor Drivers Terminator Reprap MK8 I3

Use Function
This TL-smoother module mainly used for 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.

Applicability
You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects

Use Connection
Connect the TL-smoother module to the corresponding position of the motherboard’s drive socket and motor, or you can cut the motor wire into two pieces and soldering the board between them and then will achieve better conductivity

Specification
TL smoother Size: 40mm * 30mm
Dupont wires length: 150mm

Package Included
4 * 3D Printer TL Smoother
4 * dupont wires

Product Features

  • TL-Smoother】Addon module for 3D printer stepper motor drivers, The board provides flyback diodes (freewheeling diodes) for the motor outputs, also protected against induction voltages in the unpowered state of the driver.
  • 【Applicability】You will get smoother movement especially on the delta-style 3D printer under DVR8825 stepper drivers or A4988 / 2 drivers. I3 and UM models can also be used, and different machines will have different clipping effects
  • 【Use Function】This TL-smoother module mainly used for 3D printer motors, especially for parallel arm configurations of the machine effect is significant. Lower vibration lower noise smoother result.
  • 【Use Connection】Connect the TL-smoother module to the corresponding position of the motherboard’s drive socket and motor, or you can cut the motor wire into two pieces and soldering the board between them and then will achieve better conductivity
  • 【TL-Smoother assembly instructions】link: https://drive.google.com/open?id=1Kdq4FKcv4PRkuYbeoWxF_myPKDdfZud9XCIloQEaLqs

Detailed Information available on our Homepage…

5 Pack 3D Printer Part Accessories Limit Switch Mechanical Switch Module Endstops Switch for RepRap CR-10 10S Ender 3 Pro S4 S5 Series by MXRS

100% Creality Original,Compatible with all Creality 3D Printer
Model Number:Limit Switch
Max Voltage:250V Max Current:5A
Board size: 20 x 20 x 7 mm/ 0.8 x 0.8 x 0.3 inch
Package Included:
5 PCS * Limit Switch
After-sales Guarantee: we are responsable for our every product, if you received defective or item did not work great, please feel free to contact us, we will resend you replacement for free or refund you.

Product Features

  • Creality 3D Printer parts, compatible with all creality 3d printer.
  • DIY Must 3D Printer switch: With trigger indicator, 3 Pin N/O N/C control, easy to use Micro Switch;
  • Optical Endstops swich with 1M Photoelectric Light Control.
  • Replace your old or broken CR10 limit switch with a new one.A great accessory for 3D printer.Small sized, easy to install.
  • Warm Tips: Generally, the printer DIY system need at least three optical switches.

Visit The Website For More Information…