Aokin 3D Printer UV Resin Curing Light 405nm for SLA DLP 3D Printer Solidify Photopolymer Resin UV Resin with 10W Output Effect, DIY Curing Station or Curing Box

Aokin 3D Printer UV Resin Curing Light 405nm for SLA DLP 3D Printer Solidify Photopolymer Resin UV Resin with 10W Output Effect, DIY Curing Station or Curing Box

Description:

The lamp can be used in DIY curing station or curing box and handheld applications.

Just not stare at the light for a long time during operation and minimize skin exposure. If you have goggles, please wear an eye protection device when using this light.

The LED UV light is equal to 10 times the brightness of traditional UV lamp, 1W is equal to 10W. Power consumption is only one-tenth of the traditional UV lamp, energy-saving, and environmental protection.

This UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects solid efficiently and use less time than usual ways.

Specification:

Product power: 10W

Input voltage: AC 90-230V

Light body size: 110*85*75mm

Light emission wavelength: 405nm

Lamp type: high-bright foot UV lamp

Tips:

To achieve the best curing effect, please noted:

1. the wavelength of the photocuring agent contained in the UV glue must be the same as the wavelength emitted by the UV lamp.

2. the UV energy emitted by the UV lamp must meet the energy required for curing the UV glue. The energy of the UV light is proportional to the power of the lamp.

Package Includes:

1 x UV resin curing light

1 x mount nut and bolt

Product Features

  • Feature: this UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects cure much faster and stronger and use less time than usual ways.
  • Material: this UV resin curing light is made of aluminum alloy shell and tempered glass lampshade, quite solid construction, ensures durability. LED UV lamps can be used for up to 10,000 hours.
  • Usage: the LED UV lamp should be as close to the surface of the cured object as possible, the closer the distance, the better, within 5 cm to the light, the small size resin can be cured in 8-15 seconds, curing time is based on print size and thicker parts need more time.
  • Safety: cold light source, low heat generation, will not damage the surface of the illuminated object, suitable curing for liquid crystal surface, film printing, etc. the lamp puts out intense and consistent UV light. just not stare at the light for a long time during operation and minimize skin exposure.
  • Use: UV curing (UV glue/crystal glue/ink), Resin curing (SLA DLP print curing), Fluorescent Agent Detection, Photochemical Catalysis, Nail Art, Aging Test, UV Printing, Mobile Phone LCD Screens, Small Part Curing, Scientific Research, etc

Detailed Information available on our Homepage…

ANYCUBIC 3D Printer Resin, 405nm SLA UV-Curing Resin with High Precision and Quick Curing & Excellent Fluidity for LCD 3D Printing – 500ML/Grey

Note: Two kinds of bottles with same 500g resin will be send randomly.Parameter information:Size: ~500g/500mlColor: GreyMain material: resin monomer, photo initiatorExposure parameters: Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15sWarranty: 12 monthsResin parameters:Solidify wavelength: 405nmHardness (D): 79.0Viscosity (25C): 552.0 mpa. sLiquid density: 1.100 g / cm3Solid density: 1.184 g / cm3Flexural strength: 23.4 MpaTensile strength: 23.4 MpaElongation frequency: 14.2 % Precautions: 1. Storage1) Keep away from light and sealed at room temperature. (Sunshine contains a certain amount of UV light which would solidify photosensitive resin. Inside the machine, the ANYCUBIC resins would not be affected for over 48 hours if it is not UV light)2) It is recommended to store the resin under 15C -35C in a sealed container. Avoid any dusty or moist environment. 2.Usage:1) Shake well before use. Avoid any direct sunlight during usage. 2) Do not put in the mouth. Keep it away from the children.3) Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.4) For accidently contact, please wash by plenty of water immediately. Seek medical advice if necessary.5) Finished models are required to clean by high-concentration alcohol (>95%) about 30 seconds and post cure process may be needed for higher hardness.6) Please filter the residual resin in vat back to the container if it would not be used over 48 hours. Polluted residual resin would cause printing issues. 3. DLP printer how to choose corresponding UV resin.Before choose the ANYCUBIC resins for your own 3D printer, please confirm that the UV wavelength of your 3D printer is 405nm. We may not responsible for any damages caused by incorrect use of the resin.

Product Features

  • Specifically designed for led light source to achieve better printing quality
  • Rapid prototyping. The resin has been developed to reduce the forming time
  • Strong adhesion. The adhesion has been improved for higher print success rate
  • Appropriate toughness. Anycubic uv resins have good combination of hardness and toughness, which brings easy removal of the POT016 and fine printing details
  • Great stability. After cured, Anycubic uv resins show good stability in moist and corrosive environment

Detailed Information available on our Homepage…

Calorbot 3D Printer Resin Filter, 3D Printer Accessories Photosensitive Resin Filter Funnel Combination Light Curing Consumable Filter,Resin Filter Cup+Silicon Funnel Disposable for Anycubic/ELEGOO

Calorbot 3D Printer Parts, Silicone Foldable Funnels+Stainless Steel Resin Filter for Pouring Resin Back Into Bottle for ANYCUBIC Photon Sparkmaker Kelant Orbeat D100.

Funnel
Material: silicone
Color: random
Width Top: 75mm
Width Bottom: 15mm
Height: 100mm
Type: Foldable

Filter
Material: stainless steel
TopDiameter: 60mm
Bottom Diameter: >27mm and <60mm
Height: 34mm

Note
After use rinse the filter in IPA to clean it.
Package List
1 * filter
1 * silicone funnel (random color)

Warranty:We are Confident about 3D Solar Turntable quality,Within 24 hours response,100% Satisfaction Guarantee.

Product Features

  • Silicone funnel + metal filter mesh. (funnel color random).
  • Funnel adopts high quality silicone as raw material, soft and pliable, healthy and eco-friendly, collapsible design, compact and convenient.
  • Filter is made of stainless steel, easy to use and clean, effectively filter impurities while pouring resin back into the bottle.
  • Silicone funnel is used to pour resin back into a bottle, fit all kind of bottle ( the max width of the bottle neck is 15mm).
  • Useful accessory for 3D printing.For better using effect, use the stainless steel filter matching with foldable funnel.

Detailed Information available on our Homepage…