Problem: 1. Screen for machine is blank no menu.
Poor contact – we will assist the customer to do troubleshoot problem;
Be destroyed in transit – we can offer free replacement part;
Run system is bad – we can assist customers to update the firmware to solve this issue. The link of the firmware as the following:
Problem 2: Not extruding.
3D printer is a technical product, it is not easy for new users to print successfully at first time. They may meet some problems like Not extruding.
There are some causes, and we listed these cases in our manual, to tell our customer how to find the reasons and the way to solve the problem.
Build Volume: 300 x 300 x 400mm
Printing Precision: 0.05mm
Nozzle diameter: 0.4mm
Printing Speed: 40-145mm/s
Supported Software: Repetier-Host, Cura, Simplify 3D, Slicer PE, etc
Print file types support: Gco, gcode
Supported OS: Windows / Mac / Linux
Nozzle temperature: Max 260??
Heat bed temperature: Max 110??
AC Input: 100-240V
DC Output: 24V/16A
Connectivity: USB connector or stand-alone SD card printing
1 x 3D printer Thinker
1 x tool kit
1 x 8 GB SD card and USB card reader
1 x 10 meters test filament
1 x Diagonal pliers
1 x Power cable
1 x USB cable
2 x PC4-M6 fittings
1 x X-axis belt
1 x filament holder
1 x 0.4mm nozzle
1 x ejector pin
- Super quiet: Eryone 2560 Mother Board with TMC2208 V1.2 stepper motor driver and quite fans.
- Glass heated bed surface build.
- Large volume and high quality: The printing volume is 300*300*400mm, with carefully-selected components. After 3 steps assembly, the printer can print pretty well, almost no need to calibrate.
- Power failure resume feature: Built-in supercapacitor and circuit designing, the mainboard will store the height value of Z-axis when the power off. When the power system resume, the printer can resume the print.
- Compatible with Auto-leveling sensors: With pre-designed interface for BL-touch and proximity switch, update Eryone Thinker S firmware to enable the auto-leveling function is easily.
Click Here For More Information
2019 SUNLU S8 3D Printer Upgrade V1.15 Silent Mainboard with 310 x 310 x 400mm Build Volume
Nozzle QTY：Single Nozzle
Nozzle Diameter：Equipped with 0.4mm、0.3mm & 0.2mm (Optional)
Print Speed：20-100mm/s(Recommended: 50mm/s)
Recommended Filament：1.75mm PLA, ABS, PETG, HIPS,WOOD, PLA Carbon Fiber
Nozzle Max Temp：260℃
Input Format：STL .OBJ .AMF
Power Parameter：115V/230V AC,50/60HZ
1.Built-in motherboard power supply: According to the circuit design, device specifications and heat dissipation, the wires are concentrated in the machine for independent control.
2.The printing is more stable: the double Y-axis motion control system drives the high-quality stable output of the two-side synchronous belt, effectively avoiding the shock caused by printing.
3.Design: The body is simple and generous, enhance the creative space of printing.
4.Power failure continued: Automatically store the print record after power off, continue printing after power-on, and improve the model print success rate.
5.Broken material detection: When the consumables are exhausted, disconnected, or other abnormal conditions occur, the printing will be automatically suspended, and printing will continue after the consumables are accessed.
6.Easy leveling method: The large hand-turning nut is ergonomically designed, the leveling speed is fast, and it is free from time-consuming and labor-intensive problems.
7.Industrial grade circuit board: After high load safety.
- 【S8 3D PRINTER WITH LARGE PRINT AREA】 With a generous print volume (310x310x400mm), S8 offers amazing print quality, making it one of the best 3D printers for professional use. S8 is incredibly reliable when it comes to producing 3D models, and the accuracy of the 3D replications is incredibly impressive. If you need a 3D printer that can reliably reproduce many 3D objects accurately, SUNLU S8 is a fantastic choice.
- 【MUCH STABLE PRINTING】 There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, S8 greatly increase its printing stability, also, the built-in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
- 【QUICK INSTALLATION】 When it arrives on your doorstep, the S8 3D Printer comes 95% pre-assembled, which makes installation easy as can be. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the glass-smooth headed surface, it makes all types of filaments can be easily stick on.
- 【FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY】 Have you ever tripped over the power cord and lost a long hours print? S8 will save you from the loss of power. When it recovers from a power failure, the machine will continue to print. Also, it will automatically pause your 3D print and notifies you when you’ve run out of filament, saving you time and money.
- 【SUNLU S8 QUality GUARANTEE】 Buy straight from the manufacturer to receive the 1-year limited manufacturer’s warranty on your new 3D printer. With high customer satisfaction and excellent technical support. We are ready to help you. (Contact Us: Your Amazon Buyer Account > Click Your Account > Your Orders > Find your order and click Contact Seller)
Click Here For More Information
Screen: Touch Screen
Nozzle Diameter: Standard 0.4mm
Nozzle Number: 1
Bed Temperature: 0-90℃
Support Print Material: ABS，PLA，TPU, etc.
Filament Diameter: 1.75mm
Printing Size: 300x300x400mm/11.8×11.8×15.7inch
Printer Size: 575x465x656mm/22.6×22.6×25.8inch
Enjoy the satisfaction of completing your own DIY 3D printer kit.
Colorful touch screen, status display, function display, parameters all setting are clear to check.
Automatic leveling, easy leveling with both automatic leveling and auxiliary leveling modes.
Double gear extrusion mechanism, has a large extrusion to make sure feeding smoothly
Support filament runs out detection, when the material run out, it will remind you to change new filament.
Package Content:1 x 3D Printer Kit
- Fast Heating & Resume Print Feature: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- Semi-assmbled kit: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of Nesaila M18 Pro 3D printers as you finish putting it together. You only need about 1 hours to assemble it.
- Filament Run-out detection : Support filament runs out detection, when the material run out, it will remind you to change new filament, saving you time and money.
- Removable build surface plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- Aluminum profile and sheet metal as frame structure [simple] [beautiful] [practical], [X] [Y] [Z] axis using rolling pulley, belt and screw transmission structure, this structure print product stability, surface fine, small platform vibration.
Click Here If You Need More Detailed Info…