RioRand(TM) Reprap Hot End 2.0 version with 0.35mm & 0.4mm nozzle,3D printer,Mendel

The 2.0 version is a high performance hotend for use with RepRap and other 3D printers,making your printing even faster. The hot end comes completely assembled: wire it to your electronics and it is ready to print. It now includes an aluminum mount plate and aluminum heat sinks. The 2.0 also brings changes to the nozzle, heater block, and threaded extension with harder aluminum and revised thread profile for more reliable nozzle changes.
Optional nozzle sizes are available from 0.25mm to 0.75mm. With the optional PTFE tube, you can print 3mm filament.
The hotend comes assembled with both 0.35mm and 0.4mm nozzle. Otherwise, if you would like a different nozzle size you will need to purchase an extra nozzle and make the change once you receive both parts.

Features:
Aluminum Block Resistor Hotend
Easily assembled and torn down with no glue or ceramic
Wire Strain Relief
Includes machined aluminum and steel parts, and laser cut wooden parts
Includes pre-crimped wiring

Package list:
1 x hot end 2.0 version
1 x 0.35mm nozzle
1 x 0.4mm nozzle

Product Features

  • Powered by RioRand advanced technology
  • RioRand(TM) Reprap Hot End 2.0 version with 0.35mm & 0.4mm nozzle,3D printer,Mendel

Detailed Information available on our Homepage…

RioRand(TM) Plastic parts printed in ABS for 3D Printer Wade Extruder, RepRap, Prusa Mendel

This plastic parts are printed in blue ABS from 0.3mm layer height,0.35mm nozzle and 3mm filament.The X-carriage comes with inner diameter 39mm,has options for your hotend. These parts have had the support material removed and hole sizes checked so they are ready for use, however there may be some minor cleanup and fitment adjustments remaining.

Package List:
1 x Small gear mod
1 x Big gear mod
1 x Wade body
1 x Wade idler
1 x X-carriage

Product Features

  • Powered by RioRand advanced technology
  • RioRand(TM) Plastic parts printed in ABS for 3D Printer Wade Extruder, RepRap, Prusa Mendel

Visit The Website For More Information…

RioRand(TM) RepRap Mega 2560(Arduino compatible),RAMPS 1.4,Stepstick Pololu A4988 Stepper Driver for 3D Printer,Prusa Mendel,MakerBot

1.RAMPS 1.4
It is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. This board is mostly based on Adrian’s Pololu_Electronics and work by Tonok. Copper etch resists methods suggested by Vik. Also inspired by Vik’s work with EasyDrivers. circuit design based mostly on Adrian’s Pololu_Electronics Joaz at RepRapSource.com supplied initial pin definitions and many design improvements. Much inspiration, suggestions, and ideas from Prusajr, Kliment, Maxbots, Rick, and many others in the RepRap community.
2.Iduino Mega 2560
Iduino Mega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program directly via USB without having to go through other external writer.
3.A4988 driver
This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection by Pololu; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil.
Package List:
1 x RAMPS 1.4 Shield
1 x Iduino Mega 2560 Board
4 x A4988 stepper driver

Product Features

  • Powered by RioRand advanced technology
  • RioRand(TM) 5 x A4988 with heatsink+powerful crewdriver set+cooling fan,3D Printer RepRap

Detailed Information available on our Homepage…