BIQU 3D Printer Part Tango V1.0 Control Board Upgraded Rumba Controller Board Support Multi-Color Printing for 3D Printer

Introduction
Electronic part is the brain of a 3D printer, and all movements are controlled by electronic parts. The Tango1.0 baord is R&D for 3D Printer,which is Based on AVR Processor ATMEGA2560 controller board.It support three different color filament, You can use a personal computer with a USB cable to control the 3D printer

Product Parameter
product name:BIGTREETECH-Tango V1.0 Dimension:150mm*75mm
Net weight:99g (No driver)
Power output: 12-24V
Support motor number: six
Support motor driver: A4988、DRV8825、TMC2100
Controller screen: LCD2004、LCD12864 and other screen
Compiled file:Arduino IDE
Firmware:Marlin
Controller software:Printrun、Repetier-Host

Product instruction
1. There are six stepper motor and five temperature sensor input interfaces;
2. Power input is 12-24V, the rated voltage of the hot bed is same as the input voltage of the power supply, the voltage of the hot bed will be 12v if the voltage of power supply is 12v,and the voltage of the hot bed will be 24v if the voltage of power supply is 24v.
3.PWM DC output (heating rods, fans, etc.); 6 outputs (1 large current, 3 medium currents, 2 small currents), driven by high performance, low on-resistance MOS transistors, LED as an indicator for each output.
4. Totally support for JTAG operation

Package List:
1xTango 3D Controller
1X USB Cable

Product Features

  • Integrated design, installed easily. Compared with other 3D printer control board(such as RAMPS, etc.), the Tango V1.0 support more motor drivers, Reduce some straight plug-in part, which improve the connectivity and stability
  • LCD expansion interface,support LCD screen and SD expansion interface, it can achieve offline printing
  • Using ATMEGA2560 as the main control chip, with high-performance USB to UART chip CP2102,it is compatible to all related RAMPS firmware
  • Five ADC interfaces for temperature measurement, three nozzle temperature measurement, one hot bed temperature measurement, and one ambient temperature measurement
  • Six-way PWM: Three control nozzle heating, one control the heating of the hot bed, two control fan rotation; Six-way limit switch; Xmin/Xmax, Ymin/Ymax, Zmin/Zmax can be connected to sensors such as mechanical switches, optical switches, and proximity switches

Visit The Website For More Information…

Geeetech Rumba 3D Printer Controller Board ATmega2560 for Reprap Prusa Mendel

In virtue of the integrated control board which is based on ATmega’s AVR processor, Rumba is the core of a 3D printer, carver, laser cutter and other CNC. The integrated design makes it easy to install and debug. Compared with other 3D Printer control board, Rumba has one more motor driver and less plug-in part so that it can improve the connectivity and stability of printing.

Product Features

  • Use the same CPU as that of Arduino MEGA as main control chip, Atmega2560 cooperates with high-performance USB chip in order that it is compatible with all RAMPS relevant firmware;
  • Five interfaces as input for temperature sensor.
  • with extended LCD shield interfaces, supports offline printing( note, SD card slot is not on rumba but on the LCD shield)
  • Supporting 6 pieces of 16 micro stepping drivers of A4988.
  • PWM DC output( heating pipe ,fan), six channels of output( 1 channel of high current, 3 channels of medium current and 2 channels of low current). Use low on-resistance MOS Varactor as driver and LED tests each output.

Visit The Website For More Information…

Geeetech Rumba + 6 X A4988 stepper driver+ 3XHeatsink + sticker

In virtue of the integrated control board which is based on ATmega’s AVR processor, Rumba is the core of a 3D printer, carver, laser cutter and other CNC. The integrated design makes it easy to install and debug. Compared with other 3D Printer control board, Rumba has one more motor driver and less plug-in part so that it can improve the connectivity and stability of printing.

Specifications

The same CPU with that of Arduino MEGA as main control chip, laced with the high-performance USB chip-
Atmega2560, it is compatible with all relevant firmware of RAMPS

Five interfaces as input for temperature sensor.

All pins being broken out for more extended development..

With expanding interface, it can connect the LCD display and the development board.

Servo’s expanding interface makes it easier to add the automatic leveling.

Supporting 6 pieces of 16 micro stepping drivers of A4988.

PWM DC output( heating pipe ,fan), six channels of output( 1 channel of high current, 3 channels of medium

Current and 2 channels of low current). Use low on-resistance MOS Varactor as driver and can LED tests each output.

Power-supply: power input range from12v-35v, dual power supply to avoid collision; hot bed connects 11A,
12V, other sections connect 5A, 12V. a 12V cooler to reduce the high temperature from the high current of Mega controller.

Adopt the popular control board firmware-Marlin, which has good stability, usability and function.

package list

1X Geeetech Rumba

6 x A4988 stepper driver

6 x Heatsink

3 x sticker

Product Features

  • Five interfaces as input for temperature sensor
  • All pins being broken out for more extended development
  • Supporting 6 pieces of 16 micro stepping drivers of A4988.
  • PWM DC output( heating pipe ,fan), six channels of output
  • Adopt the popular control board firmware-Marlin, which has good stability, usability and function.

Visit The Website For More Information…