Artillery Sidewinder X1 SW-X1 3D Printer

Technical Specification:

Layer Resolution:0.1mm

Frame:Aluminum Extrusion

XYZ Positioning Accuracy:0.05mm, 0.05mm, 0.1mm

Printing Filament : PLA, ABS, TPU, Flexible Materials

Filament Diameter: 1.75mm

Nozzle Diameter: 0.4mm

Machine Dimensions: 550 x 405 x 640 mm,550 x 405 x 870 mm (with spool holder),21.65 x 15.94 x 25.20 in,21.65 x 15.94 x 34.25 in (with spool holder)

Shipping Box Dimensions: 780 x 540 x 250 mm,30.71 x 21.26 x 9.84 in

Machine Weight: 14kg

Shipping Weight:16.5kg

Maximum Print Speed:150 mm/s

Maximum Travel Speed:250mm/s

Build Volume:300 x 300 x 400 mm,11.81 x 11.81 x 15.75 in

Extruder Type: Titan Extruder (Direct Drive)

Maximum Build Plate Temperature:130C

Power Requirement: 110V – 240V 600W max (with heated bed turned on)

Connectivity: USB, TF Card, USB Stick

Control Board:MKS Gen L

Nozzle Type: Volcano

Special Feature:

Exclusive Ultra-Quiet Stepper Driver

Synchronized Dual Z System

Direct Drive Extruder,Filament Runout Detection and Recovery

Power Loss Detection and Recovery

Rapid Heating AC Heat Bed

Touch Screen Control

Product Features

  • Expandable filament holder, support 0.5-3kg filament roll.Easy assembly, come 95% pre-assembled.
  • FFC cabling system, tidy, good looking.Synchronized Dual Z System, stabler X axis, always level on both ends.
  • Direct Drive Extruder with Volcano nozzle, better control over fast extrusion.
  • AC heated glass build platform, faster heating, 80C in 80 seconds, 110C in 130 seconds.
  • Exclusive ultra-quiet stepper drivers.Patent pending Z nut coupler, smoother Z movements.

Click Here For More Information

Artillery Sidewinder X1 3D Printer V4 Newest Model 95% Pre-Assembled 300x300x400mm, Reset Button Dual Z Axis Ultra-Quiet Printing 0.6mm Direct Drive Extruder Filament Runout Detection & Recovery …

Click Here For More Information

Artillery Sidewinder X1 3D Printer 2019 Newest 95% Pre-Assembled 300x300x400 Model with Dual Z Axis Ultra-Quiet Printing 0.6mm Direct Drive Extruder Filament Runout Detection and Recovery (Silver)

SPECIFICATION
Layer Resolution:0.1mm
Frame: Aluminum Extrusion
XYZ Positioning Accuracy: 0.05mm, 0.05mm, 0.1mm
Printing Filament:PLA, ABS, TPU, Flexible Materials
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm
Machine Dimensions: 550 x 405 x 640 mm
550 x 405 x 870 mm (with spool holder)
21.65 x 15.94 x 25.20 in
21.65 x 15.94 x 34.25 in (with spool holder)
Shipping Box Dimensions: 780 x 540 x 250 mm / 30.71 x 21.26 x 9.84 in
Machine Weight: 14kg
Shipping Weight: 16.5kg
Maximum Print Speed: 150 mm/s
Maximum Travel Speed: 250mm/s
Build Volume:300 x 300 x 400 mm / 11.81 x 11.81 x 15.75 in
Extruder Type: Titan Extruder (Direct Drive)
Power Requirement: 110V
600W max (with heated bed turned on)
Connectivity:USB, TF Card, USB Stick
Control Board: MKS Gen L
Nozzle Type:Volcano

Product Features

  • MUCH STABLE PRINTING: There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, SW-X1 greatly increase its printing stability, also, the built in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
  • RUNAWAY PROTECTION HEATBED: The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.
  • QUIET TO USE: With a 300 x 300 x 400 mm build volume, the Sidewinder X1 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X1 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds. Feel free to work on other things while the machine is printing beside you.
  • FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY: Have you ever tripped over the power cord and lost a long hours print? SW-X1 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you’ve run out of filament, saving you time and money.
  • FAST AND PRECISE: The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, SW-X1 makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X1 comes 95% pre-assembled, which makes installation easy as can be.

Click Here For More Information