Tip of the nozzle,aluminum heating block,Throat pipe (built-in Teflon).
MK8 Extruder Hot End kit,white wire was temperature thermistor,red wire was heating tube 12V/24V 40W.
Material: Aluminum & Stainless Steel & Brass
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)
Thermistor and heater cable length: 1m
Voltage Power: 12V 40W,24V 40W
1x Aluminum block
1x Heating tube (heating tube 1 m long,12V /24V 40W)
1x 1.75MM 0.4MM Brass Nozzle
1x M6x30mm Throat pipe (built-in Teflon)
1x Thermistor+Brass sleeve (1 meter long)
1x MK8 Blue Silicone Case
- Made of high-quality material
- It is very durable
- Easy to install and use
- Best gift for family and friends
- Just contact me if you have any problems
Click Here For More Information
Note: These Extruder Head Sprinkler Kit Suitable for Creality Ender 3.
More stabel temperature. Non-stick silicone sock instead of the cotton isolation is convenient.And most importantly,it offers a huge boost in temperature stability, especially if you use high flow of cooling air around the nozzle to cool the print. Silicone socks will keep the print head stay clean and prevent the filament from sticking to the heater block or spout.
These are original replacement parts for Creality 3D printer Ender 3.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) MK8 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 12V 40W
– Installation type: External thread connection
– Application: Creality 3D printers ender 3
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 24V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Connection Method:external line connection
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
3X Silicone Boots ( as free gift)
5x 0.4mm Brass Nozzle ( as free gift)
- The 3D Printer Extruder Hot End Assembled Kit are original and high quality for Creality Ender 3
- MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality Ender 3 3D printer.
- 3 silicone boots and 5pcs 0.4mm brass nozzle for emergency and replacement.It’s always practice to have spare parts readily available because failures normally occur when you can least accept them and at a time where there is normally a holiday of sorts to make replacement and/or repair even more inaccessible.
- Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
- Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
Visit The Website For More Information…
Thread type: M6
Output diameter:0.4 mm;Input filament diameter:1.75mm
Compatible: V5 and V6 extruder hotend Filament
Type: nozzle neck
Material: stainless steel
External thread: M6
Filament diameter: 1.75mm
Inner hole for install screw: M6 and M3 (heat pipe and thermocouple)
V6 Silicone Cover:
Suitable for heat block size: 20 x 16 x 12 mm( L x W x H )
PTFE Teflon Tube:
Material: PTFE (Poly Tetra Fluoro Ethylene)
Size: outside diameter: 4mm, inside diameter: 2mm
The density is 2.15-2.20g/cm3 and the heat resistance is so nice so that it’s temperatures can up to 260℃
PTFE Tubing OD: 4mm
Material: Copper, Plastic
PTFE Tubing OD: 4mm
Material: stainless steel,Plastic
10 x 0.4mm V6 brass nozzle
5 x 0.35mm Cleaning needle
5 x 0.4mm Cleaning needle
3 x Aluminum heater block
3 x Extruder throat tube
3 x V6 silicone socks
2 x Palette Knife
2 x Tweezers
2 x PC4-M6 quick fitting
2 x PC4-M10 straight pneumatic fitting
1 x Nozzle spanner
1 x Heater block spanner
1 x Allen wrench
1 x 1 M teflon tube
- Cleaning needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears.
- V5 V6 Nozzles: Material: brass, Thread type: M6, Output diameter: 0.4 mm; Input filament diameter: 1.75 mm, Compatible: V5 and V6 extruder hotend Filament, supported: ABS / PLA / PETG / Carbon Fiber
- Spanners: Nozzle spanner make nozzle installation and removal easier. Suitable for nozzles with a diameter of 6mm, such as MK8 nozzles, E3D V5 V6 nozzles, etc. Heating block spanner only fit for V6 heat block. Allen wrench makes mounting and dismounting small screws easier.
- Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers.
- Silicone socks: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print.
Detailed Information available on our Homepage…