2019 SUNLU S8 3D Printer Upgrade V1.15 Silent Mainboard with 310 x 310 x 400mm Build Volume
Nozzle QTY：Single Nozzle
Nozzle Diameter：Equipped with 0.4mm、0.3mm & 0.2mm (Optional)
Print Speed：20-100mm/s(Recommended: 50mm/s)
Recommended Filament：1.75mm PLA, ABS, PETG, HIPS,WOOD, PLA Carbon Fiber
Nozzle Max Temp：260℃
Input Format：STL .OBJ .AMF
Power Parameter：115V/230V AC,50/60HZ
1.Built-in motherboard power supply: According to the circuit design, device specifications and heat dissipation, the wires are concentrated in the machine for independent control.
2.The printing is more stable: the double Y-axis motion control system drives the high-quality stable output of the two-side synchronous belt, effectively avoiding the shock caused by printing.
3.Design: The body is simple and generous, enhance the creative space of printing.
4.Power failure continued: Automatically store the print record after power off, continue printing after power-on, and improve the model print success rate.
5.Broken material detection: When the consumables are exhausted, disconnected, or other abnormal conditions occur, the printing will be automatically suspended, and printing will continue after the consumables are accessed.
6.Easy leveling method: The large hand-turning nut is ergonomically designed, the leveling speed is fast, and it is free from time-consuming and labor-intensive problems.
7.Industrial grade circuit board: After high load safety.
- 【S8 3D PRINTER WITH LARGE PRINT AREA】 With a generous print volume (310x310x400mm), S8 offers amazing print quality, making it one of the best 3D printers for professional use. S8 is incredibly reliable when it comes to producing 3D models, and the accuracy of the 3D replications is incredibly impressive. If you need a 3D printer that can reliably reproduce many 3D objects accurately, SUNLU S8 is a fantastic choice.
- 【MUCH STABLE PRINTING】 There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System, S8 greatly increase its printing stability, also, the built-in branded power supply ensure stable and sufficient power. Spend more time making without having to manually adjust the print bed.
- 【QUICK INSTALLATION】 When it arrives on your doorstep, the S8 3D Printer comes 95% pre-assembled, which makes installation easy as can be. Additionally, the heated bed can heat up to 80C in 2 minutes and it only takes the 0.4mm nozzle about five minutes to heat up to 110°C. With the glass-smooth headed surface, it makes all types of filaments can be easily stick on.
- 【FILAMENT RUN-OUT+ POWER LOSS DETECTION & RECOVERY】 Have you ever tripped over the power cord and lost a long hours print? S8 will save you from the loss of power. When it recovers from a power failure, the machine will continue to print. Also, it will automatically pause your 3D print and notifies you when you’ve run out of filament, saving you time and money.
- 【SUNLU S8 QUality GUARANTEE】 Buy straight from the manufacturer to receive the 1-year limited manufacturer’s warranty on your new 3D printer. With high customer satisfaction and excellent technical support. We are ready to help you. (Contact Us: Your Amazon Buyer Account > Click Your Account > Your Orders > Find your order and click Contact Seller)
Click Here For More Information
1.Touch screen and remote extruder
2.Power Failure Recovery and safety protection system
3.Filament outage or fracture Detector
4.Achieve Automated Leveling
5.Humanized power management
6.Large print size of 300*300*400mm
7.High-power hot bed, 24V safe voltage,heating faster and safer
8.Thermal cooling system
9.High-precision nozzle of 0.4mm hot-end with straight-through design
10.Advanced movement system
11.Full metal body and only 15 minutes to assemble
12.Highly integrated print bed
Modeling Technology：FDM (Fused Deposition Modeling）
LCD Touch screen: Yes
Max Traveling Speed：20-150mm/s
Input：100-120V 7A;200-240V AC 3.5A;50-60Hz
Printing Temperature: Room temp to 250℃
Support Software: Cura, Reptier-Host
Connection：USB cable or SD card
- 【EASY TO ASSEMBLE AND USE】Full metal body, stable and durable; and only 15 minutes to assemble. Easy to operate, brand new friendly UI to preview model and printing process on screen, offline printing.
- 【RECOVER PRINTING FUNCTION】Not like traditional printer, LK1 has the ability to resume printing even after a power outage or lapse occurs; And built-in filament sensor, when the filament runs out, it will stop printing, and will continue once there are filament. So you do not need to print from the beginning again, which can help you save a lot of material and time.
- 【EXTRA LARGE BUILD PLATFROM】This 3d printer comes with one of the largest build spaces available. At 12inx12inx15.7in, you can print models that 90% of other printers could not. The unique High-precision nozzle of 0.4mm hot-end with straight-through design reduces the weight on the X-axis which delivers better performance even on very tall prints.
- 【PRINTING EFFICIENT AND SAFE】360w power and 24V safe voltage, heating faster; 3D printer comes with a tempered glass plate on the heated bed, greatly resolving warped bed issues. And build in power management and thermal cooling system, keep the printing safer.
- 【100% QUALITY GUARANTEED】Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!
Click Here For More Information
CTC- A8-W5 Wood Upgrade Prusa I3 3D Printer
Printing specifications: Print technology: FFF / FDM
Layer resolution: 0.1-0.4MM
Positioning accuracy: 0.1-0.4MM Filament
diameter: 1.75MM Nozzle
diameter: 0.4MM (Custom options: 0.5 / 0.3 / 0.2MM)
Filament type: ABS / PLA / Flexible PLA
Operating system: OS XP / Vista / Win7 / Win8 / Win10 / Linux
3D AC printing software: Repetier-Host
Data format : STL, G-Code
Maximum temperature of the hot bed: 50-110 ? (adjustable)
Maximum extruder temperature: Recommended: 210 ?, Maximum 250 ?
Power supply: DC 12V / 20A
Output: DC12V / 15A
Connectivity: USB, SD card (stand-alone printing support)
Hot bed material: Alloy
XYZ aluminum Rods: wear resistant, stainless steel
Step motors: 1.8 ° step angle with 1/16 micro-stepping
Physical structure: Reprap
Item weight: 8Kg / 17.6Lbs
Package size: 51 * 31 * 21cm / 20.1 * 12.2 * 8.3in
Package weight: 9.5Kg / 20.9Lbs
1x 3D Printer Kit
1x filament roll (10m)
1x CD DISC (user manual, software, print test files, etc.)
Body Material Alloy
Chassis Material stainless steel
Print Technology FFF (Fused Filament Fabrication)
Layer Thickness 16
Positioning Precision 0.1-0.4MM
Print Jets Single Jet
Filament Diameter 1.75mm
Speed 15mm psp
Connectivity USB, SD card (stand-alone printing support)
Operation System Requirements : OS XP / Vista / Win7 / Win8 / Win10 / Linux 3D AC printing software: Repetier-Host
- ✔ Support the diversity of material. aluminum heating plate and wide temperature allow the printer, with many materials such as ABS, PLA…. etc. to work..
- ✔ Large Print Size: 220 * 220 * 240mm and LCD panel. MK8 nozzle, Cut quickly, high printing precision, good result and easy to load filament, poye the complex construction molding.
- ✔ Quick installation: According to the instructions, you can assemble it quickly.
- ✔ Your operating system for XP, for WIN7, for MacOS, for Solidworks. Printing software: Cure. SD card is supported.
- ✔ Wide application: The equipment can be diffused in office, education digital institution, Family, hospital etc. You can create character movie, children’s toys, quick model design, parts manufacturing, medical model.
Click Here If You Need More Detailed Info…