BIQU SKR V1.3 Control Board 32 Bit Board Smoothieboard with TMC2208 V3.0 3D Printer Parts SKR V1.3 MKS GEN L Ramps 1.4 Board

SKR Motherboard Parameters:
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: ARM cortex-M3 CPU
Input voltage: DC12V-DC24V 5A-15A
Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, can be independently external motor drive
Driver working mode support: TMC2130SPI, TMC2208UART
Motor drive interface: X, Y, Z, E0, E1, five (each has a reextendable interface), Up to 256 subdivisions
Display: 2.8 “TFT, 3.5” TFT, LCD2004, LCD12864

How to Use
The SKR motherboard connects with the computer via the [USB] interface. After the driver is installed, the motherboard can be inserted into the computer to recognize the port for data transmission. Without the driver installed, it is easy for the computer to not recognize the USB port

1. Smoothieware-usb-driver-v1.1 driver installation (Windows systems only) The driver can be obtained from our open-source network
Https://www.dropbox.com/s/ighnj7oa2l0bm5g/smoothieware-usb-driver-v1.1.exe?dl= 0
2. After installing the driver, connect the computer and SKR motherboard with USB cable
Note: When using smoothieware open-source firmware, since only Windows system drivers, the SKR board at this time can only be recognized by the Windows system port! ! !
3. If you are using Marlin2.0 firmware, follow the tutorial to install:
Tutorial:https://www.dropbox.com/s/ppjfflhf3j5yzh2/MarlinV2.0%20SKRV1.1%20instruction.docx?dl=0
Driver:https://www.dropbox.com/s/a0k5idjmf4fn82f/lpc176x_usb_driver.inf?dl=0
If you need more information about this Board please contact us

Package Included
1pcs SKR V1.3 Board
5P TMC2208 V3.0
1pc USB cable

Any Question about this Board please contact with us

Product Features

  • Using 32-bit main frequency 100MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved
  • Reserved extended port SERVOS of PWM signal to support BL Touch
  • Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions
  • The SPI working mode of the TMC2130 driver and the UART working mode driven by the TMC2208, which eliminates complex wiring process and can be used by simple unplugging jumper cap
  • SKR V1.3 board has CE Certification to adopt 4-Layer PCB with “Gold Finish” process which capability is more stable and better heat dissipation

Visit The Website For More Information…

Ywillink Engraving Machine Smoothieboard 5X V1.1 Mainboard Part for 3D Printer

Feature:
Smoothieboard is an Open-Source Hardware CNC controller designed by the Smoothie community to run the Smoothieware firmware.
Its main design goals are:
Uses as powerful hardware as possible at the time
Can control several machine types ( 3D printers, lasers, CNC mills/routers )
Easy to setup and use
Easy to do weird, new and exciting things with
Easy to develop for
This page is for v1, the first version of the Smoothieboard hardware.

Microcontroller:
The board uses the LPC1769 microcontroller, an ARM Cortex-M3 chip :
32-bit architecture
120Mhz frequency
512kB ROM ( program space )
64kB RAM ( execution memory )
Compared to lots of other boards, this allows for faster/smoother movement, more features and more extensibility.
The board runs the Smoothie firmware, which has been designed and perfected to take best advantage of the hardware, to make the board easy to configure and use, and to add cool features.Model Number: Item Type:–Motherboard
Included:
1 x Smoothieboard 5X V1.0
5 x Heat Sink
1set x Terminals
1 set x Jump Wire
1 set x Needles

Product Features

  • Smoothieboard is an Open-Source Hardware CNC controller designed by the Smoothie community
  • Compared to lots of other boards, this allows for faster/smoother movement, more features and more extensibility.
  • The board runs the Smoothie firmware, which has been designed and perfected to take best advantage of the hardware, to make the board easy to configure and use, and to add cool features.
  • Can control several machine types ( 3D printers, lasers, CNC mills/routers )
  • Uses as powerful hardware as possible at the time

Visit The Website For More Information…

Finerplan Engraving Machine Smoothieboard 5X V1.1 Mainboard Part for 3D Printer

Feature:
Smoothieboard is an Open-Source Hardware CNC controller designed by the Smoothie community to run the Smoothieware firmware.
Its main design goals are:
Uses as powerful hardware as possible at the time
Can control several machine types ( 3D printers, lasers, CNC mills/routers )
Easy to setup and use
Easy to do weird, new and exciting things with
Easy to develop for
This page is for v1, the first version of the Smoothieboard hardware.

Microcontroller:
The board uses the LPC1769 microcontroller, an ARM Cortex-M3 chip :
32-bit architecture
120Mhz frequency
512kB ROM ( program space )
64kB RAM ( execution memory )
Compared to lots of other boards, this allows for faster/smoother movement, more features and more extensibility.
The board runs the Smoothie firmware, which has been designed and perfected to take best advantage of the hardware, to make the board easy to configure and use, and to add cool features.Model Number: Item Type:–Motherboard
Included:
1 x Smoothieboard 5X V1.0
5 x Heat Sink
1set x Terminals
1 set x Jump Wire
1 set x Needles

Product Features

  • Smoothieboard is an Open-Source Hardware CNC controller designed by the Smoothie community
  • Compared to lots of other boards, this allows for faster/smoother movement, more features and more extensibility.
  • The board runs the Smoothie firmware, which has been designed and perfected to take best advantage of the hardware, to make the board easy to configure and use, and to add cool features.
  • Can control several machine types ( 3D printers, lasers, CNC mills/routers )
  • Uses as powerful hardware as possible at the time

Visit The Website For More Information…