
Product Description
BIGTREETECH SKR V1.3 motherboard is R&D by Shen Zhen Big Tree Technology CO.,LTD. .The BIGTREETECH SKR V1.3 motherboard not only with a high cost-effective but especially suitable for small and medium-sized 3D printers
How to Work
The SKR motherboard connects with the computer via the [USB] interface. After the driver is installed, the motherboard can be inserted into the computer to recognize the port for data transmission. Without the driver installed, it is easy for the computer to not recognize the USB port
1. Smoothieware-usb-driver-v1.1 driver installation (Windows systems only) The driver can be obtained from our open-source network
Https://www.dropbox.com/s/ighnj7oa2l0bm5g/smoothieware-usb-driver-v1.1.exe?dl= 0
2. After installing the driver, connect the computer and SKR motherboard with USB cable
Note: When using smoothieware open-source firmware, since only Windows system drivers, the SKR board at this time can only be recognized by the Windows system port! ! !
3. If you are using Marlin2.0 firmware, follow the tutorial to install:
Tutorial:https://www.dropbox.com/s/ppjfflhf3j5yzh2/MarlinV2.0%20SKRV1.1%20instruction.docx?dl=0
Product Features
- Using 32-bit main frequency 100MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved
- Reserved extended port SERVOS of PWM signal to support BL Touch
- Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions
- The SPI working mode of the TMC2130 driver and the UART working mode driven by the TMC2208, which eliminates complex wiring process and can be used by simple unplugging jumper cap
- SKR V1.3 board has CE Certification to adopt 4-Layer PCB with “Gold deposition technology” which capability is more stable and better heat dissipation
Visit The Website For More Information…