Aokin 3D Printer UV Resin Curing Light 405nm for SLA DLP 3D Printer Solidify Photopolymer Resin UV Resin with 10W Output Effect, DIY Curing Station or Curing Box
The lamp can be used in DIY curing station or curing box and handheld applications.
Just not stare at the light for a long time during operation and minimize skin exposure. If you have goggles, please wear an eye protection device when using this light.
The LED UV light is equal to 10 times the brightness of traditional UV lamp, 1W is equal to 10W. Power consumption is only one-tenth of the traditional UV lamp, energy-saving, and environmental protection.
This UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects solid efficiently and use less time than usual ways.
Product power: 10W
Input voltage: AC 90-230V
Light body size: 110*85*75mm
Light emission wavelength: 405nm
Lamp type: high-bright foot UV lamp
To achieve the best curing effect, please noted:
1. the wavelength of the photocuring agent contained in the UV glue must be the same as the wavelength emitted by the UV lamp.
2. the UV energy emitted by the UV lamp must meet the energy required for curing the UV glue. The energy of the UV light is proportional to the power of the lamp.
1 x UV resin curing light
1 x mount nut and bolt
- Feature: this UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects cure much faster and stronger and use less time than usual ways.
- Material: this UV resin curing light is made of aluminum alloy shell and tempered glass lampshade, quite solid construction, ensures durability. LED UV lamps can be used for up to 10,000 hours.
- Usage: the LED UV lamp should be as close to the surface of the cured object as possible, the closer the distance, the better, within 5 cm to the light, the small size resin can be cured in 8-15 seconds, curing time is based on print size and thicker parts need more time.
- Safety: cold light source, low heat generation, will not damage the surface of the illuminated object, suitable curing for liquid crystal surface, film printing, etc. the lamp puts out intense and consistent UV light. just not stare at the light for a long time during operation and minimize skin exposure.
- Use: UV curing (UV glue/crystal glue/ink), Resin curing (SLA DLP print curing), Fluorescent Agent Detection, Photochemical Catalysis, Nail Art, Aging Test, UV Printing, Mobile Phone LCD Screens, Small Part Curing, Scientific Research, etc