Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Silicone Boots and 0.4mm Nozzle


Note: These Extruder Head Sprinkler Kit Suitable for Creality Ender 3.
More stabel temperature. Non-stick silicone sock instead of the cotton isolation is convenient.And most importantly,it offers a huge boost in temperature stability, especially if you use high flow of cooling air around the nozzle to cool the print. Silicone socks will keep the print head stay clean and prevent the filament from sticking to the heater block or spout.
These are original replacement parts for Creality 3D printer Ender 3.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon) MK8 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 12V 40W

– Installation type: External thread connection
– Application: Creality 3D printers ender 3
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 24V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass
Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Cable Length:115cm
Connection Method:external line connection

Package list:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
3X Silicone Boots ( as free gift)
5x 0.4mm Brass Nozzle ( as free gift)

Product Features

  • The 3D Printer Extruder Hot End Assembled Kit are original and high quality for Creality Ender 3
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality Ender 3 3D printer.
  • 3 silicone boots and 5pcs 0.4mm brass nozzle for emergency and replacement.It’s always practice to have spare parts readily available because failures normally occur when you can least accept them and at a time where there is normally a holiday of sorts to make replacement and/or repair even more inaccessible.
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)

Visit The Website For More Information…

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

Note: These Extruder Head Sprinkler Kit Suitable for Creality Ender 3.
These are original replacement parts for Creality 3D printer Ender 3.
Tip of the nozzle, aluminum heating block, throat pipe (built-in Teflon)
MK8 Extruder Hot End Kit, white wire was temperature thermistor, Black wire was heating tube 12V 40W

– Installation type: External thread connection
– Application: Creality 3D printers ender 3
– Nozzle size: 0.4mm
– Cable length: 1.2m
– Heating Tube: 24V 40W
– Operating temperature range: -40~+260°C (-40~+500°F)
– Material: Aluminum+Stainless Steel+Brass – Throat length: 52mm
– Aluminum block size: approx. 20 x 20 x 10mm
Package list:
1 x Aluminum Block
1 x Heating Tube
1 x M6*30mm Throat Pipe (Built-in Teflon)
1 x Thermistor +Brass Sleeve
1x 1.75mm 0.4mm Brass Nozzle
5×1.75mm 0.4mm Brass Nozzle ( as free gift)

Product Features

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)

Visit The Website For More Information…

0.2mm 0.3mm 0.4mm 0.5mm 3D Printer Extruder Brass Nozzle Sprinkler Head For Makerbot MK8

0.2mm 0.3mm 0.4mm 0.5mm 3D Printer Extruder Brass Nozzle Sprinkler Head For Makerbot MK8

Specification:

Dimension: 13 x 6mm
Material: Brass
Precision: 0.2mm / 0.3mm / 0.4mm / 0.5mm
Screw Diameter: 6mm
Inner diameter: 2.0mm
Inner diameter’s Accuracy: ±0.2mm

Package included:

1 x 3D printer extruder brass nozzle

Product Features

  • Size:*0.2mm, 0.3mm, 0.4mm, 0.5mm
  • (If you want to choose, please send email to tell us ,if no ,we will randomly dispatch. NOTE: Some items may dispatched in 3-5 business days)
  • 0.2mm 0.3mm 0.4mm 0.5mm 3D Printer Extruder Brass Nozzle Sprinkler Head For Makerbot MK8

Detailed Information available on our Homepage…