We are professional 3D printer parts manufacturer, if you have any technical problem with our product, please feel free to contact us, our engineer of technical team will always support you here.
1 x pulley (with the lock screw)
1 x pulley (without the lock screw)
2 x pulley bearing
2 x M3nS nut
2 x spring
1 x pulley shaft
1 x 3d printed piece
(Don’t include the stepper motor and the black frame)
- This gear kit is designed for Prusa i3 3d printer DIY. The gears come as a set consisting of a primary drive gear with a M3 setscrew, fits on a 5mm shaft with a flat side as those on standard Nema17 motors. A secondary drive gear with integrated high quality bearings and a shaft diameter 3.00 lenght 20 mm in precision ground hardened steel.
- Dual drive gears for 1.75 mm filament, precision custom cnc machined with extreme precision guarantees that you get the grip you always wanted.
- Manufactured in hardened steel with an protective surface treatment will give you long lifetime and extreme reliability.
- A lithium based grease is recommended to use on the gear section and in side the needle bearings for low friction and to avoid wear. A small dab of grease is enough.
- After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.
Detailed Information available on our Homepage…
Attention: Small parts, keep away from children
Kee Pang All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 2 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers
Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280°C?Long-term temperature: 240°C/ short-term temperature: 280°C? 12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
Type : Extruder Brass Nozzle Print Head
Input Diameter: 1.75mm
Output Diameter: 0.3mm 0.4mm 0.5mm
Compatibility:Compatible with all 1.75mm V6 3D printer
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
2 x 1.75mm Stainless Steel Nozzles Throat with PTFETube
1 x 0.3mm Nozzle Print Head
3 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
1 x M3 Hex driver.
- 100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement
- High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
- Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
- Easy to install: NTC connector with terminal, you can install directly
- Compatibility: Compatible with all 1.75mm V6 3D printer
Visit The Website For More Information…
Obecome 3D Printer Nozzle Cleaning Drill Bits can supports 0.4mm Nozzle FDM 3D Printers in Market Very Well, It Excellently Cleaning 3D Printer Nozzles and Solve the Filament Clog Problem!
Product name:3D Printer Nozzle Cleaning Kit
Material: stainless steel
Bit diameter: 0.4mm
Compatibility: compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap.
Tweezers: great for cleaning excess support material.
Needles: Easy to Clean Your 3D Printer Nozzles and Other Small Parts.
Package include:10pcs 0.40mm needles + 1pc Tweezers tool kit
How to use it?
✔Open your 3D printer, heating nozzle, melting the filament.
✔Use 0.4mm cleaning needle dredge nozzle, please attention your hand avoid too close to the heating nozzle.
✔Use tweezers to remove the cleaning consumables.
☛ After replacing the nozzle, please re-calibrate the distance between nozzle and build plate to ensure the quality of print parts.
☛Don’t use the needles to clean until the nozzle is heated over 200 degrees.
☛The nozzle cleaning needles are sharp,please keep them away from children.
☛Please allow slight dimension difference due to different manual measurement.
☛Due to the light and screen setting difference, the item’s color may be slightly different from the pictures.
☛if for some reason you are not completely satisfied with your purchase, our friendly Customer Service offers you full money-back or replacement guarantee.
- STURDY & DURABLE – Our 3D printer nozzle cleaners are made of 100% high quality stainless steel,durable and flexible, easy to twist.
- WIDE RANGE OF COMPATIBILITY – The printer nozzle kits is compatible with most 3D printers on the market, such as Duplicator, MakerBot, RepRap, MK8,etc.It fit on any 3D Printer 0.4mm nozzle.
- PORTABLE & STORAGE CONTAINER – The sharp tweezers and 10pcs of 0.40mm nozzle cleaning needles packed in plastic tube with an aluminum screw lid to provide extra protection for the tool for long-lasting.
- MULTI PURPOSE – Our tweezers comes with straight and curved shape tip are perfect for nozzle maintenance and cleaning excess support material, picking up a small object and getting into tight areas.The needles are very flexible, won’t break or twist easily unlike drill bits they get stuck in the nozzle, and perfect for removing excess plastic and clogs/clear jams.
- 100% RISK-FREE PURCHASE – If for some reason these 3D Printer Nozzle Cleaning Kit didn’t live up to your expectations, we’ll appreciated with you to tell us and let we have opportunities for improvement. And we promise to offer 100% money back or replacement guarantee.
Click Here If You Need More Detailed Info…