Aokin 5Pcs 3D Printer Dual Z Stepper Motor Parallel Module with 100mm Cables,for Dual Double Z Axis Dual Z Stepping Motors, for Reprap Prusa Lerdge 3D Printer Board 3D Printer Parts and Accessories

Feature:
Name: 3D Printer Dual Z Stepper Motor Parallel Module
Size: 25mm*15mm
Cable Length: 100cm

Package :
5pcs Dual z stepper motor parallel modules
5pcs Cables

Product Features

  • Design – New Dual Z Stepper Motor Adapter Parallel Module Diverter Expanding Flow Board Diffuser Splitter.
  • Application – Special designed for 3D printer stepper motor-side parallel, a driver drives two motors, put them in-line (series) with the motor.
  • Module Size – 25mm*15mm; Cable Length: 100mm; Weight: 5g,Comes with a 4 pin cable (4 inch), easy to connect.
  • Note – Only for mini printers or small current motors in parallel (with the same motor in parallel, the current are divided evenly).
  • Pakage List – 5pcs dual z stepper motor parallel modules and 5pcs cables, easy to operate.

Visit The Website For More Information…

BIGTREETECH DIRECT TMC5160 V1.2 SPI Stepper Motor Driver 6-Layer Board VS TMC2208 TMC2209 3D Printer Parts for Ender 3/5 SKR V1.3 Pro


※【TMC5160】
TMC5160 is a high-power stepper motor driving control chip, which has externally expanded power MOS tube, the the maximum current can reach 20A, low heat when working

※【 Product Advantages】
(1)External power MOS tube can support larger current, the maximum current can reach 20A (because the module is limited by area, the current cannot exceed)
(2)Super-mute mode
(3)Low calorific value
(4)can prevent motor shake
(5)not easy to lose step
(6)can drive 57 stepper motor
Special note: Currently only firmware of Marlin 2.0 and above supports the SPI mode of TMC5160

※【 Precautions】
1). Always disconnect the power supply before installing the driver to prevent the driver from burning.
2). Be sure to confirm the direction of the driver before installing the driver. Prevent the driver from burning due to reverse connection.
3). Please do not plug and unplug the driver module when power is on to avoid damage.
4). When installing the heat sink, please be careful not to contact the heat sink and the pin header to prevent short circuit.
5). The product is sensitive to static electricity, please handle it carefully when using, it is best to remove the package when using. If you have any question within using, pls feel free to contact with us【mika”Mail symbol”bigtree-tech.com】 change the Mail symbol to @

Product Features

  • ✓1.Driver chip: TMC5160-WA;
  • ✓2.Product size: 15.3mm * 20.4mm;
  • ✓3.Power supply voltage (VM): 8V — 35V;
  • ✓4.Maximum current: 4.4A (sampling resistance determines the maximum current);✓✓Maximum breakdown: 256; ✓✓Working mode: SPI mode
  • ✓5.Manual:https://github.com/bigtreetech/BIGTREETECH-TMC5160-V1.0

Visit The Website For More Information…

STEPPERONLINE 5PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead 39mm Body W/ 1m Cable and Connector for DIY CNC/ 3D Printer/Extruder

This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.5A, with holding torque 45Ncm (63.74oz.in).

Electrical Specification

*Manufacturer Part Number: 17HS15-1504S-X1
*Motor Type: Bipolar Stepper
*Step Angle: 1.8 deg
*Holding Torque: 45Ncm(63.74oz.in)
*Rated Current/phase: 1.50A
*Phase Resistance: 2.3ohms
*Inductance: 4.4mH ± 20%(1KHz)

Physical Specification
*Frame Size: 42 x 42mm
*Body Length: 39mm
*Shaft Diameter: Φ5mm
*Shaft Length: 24mm
*D-cut Length: 15mm
*Number of Leads: 4
*Lead Length: 1000mm
*Weight: 280g

Connection

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

Product Features

  • 5 PCS, High torque Low noise
  • Nema 17 stepper motor with step angle 1.8deg
  • Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
  • Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
  • Build with 1m Pin Connector

Visit The Website For More Information…