BuMat Elite Filament is the best, safest, and most consistent filament for your 3D Printer. This is the highest quality components for producing successful 3D print. It is compatible with all 1.75mm Printer like Flash Forge USA, RepRap, Rapman, Makerbot, BFB 3000, Rostock, Ultimaker Printrbot, Makibox, Buccaneer, Kossel, Mendel and many other printers.
- 1.75mm ABS at 2.2 lb. (1KG)
- User defined melting temperature at between 160 – 180 C
- Diameter of the filament: 1.75mm
- Easy to use and performs well on most prints
- Air Tight Sealed in a plastic bag
Check Out Our Website For Details…
JoyNano – Enjoy Gadgets and Electronics
1. The JoyNano 24V 10A Switching power supply is great electronic devices that operate on 24VDC and require less than 240W of power.
2. Constant voltage output to ensure the stability of the power supply. Efficient work and low temperature.
3. Input voltage 110V/230V is selected by switch. Before power on please check input voltage avoiding damage.
4. Safety Protection: Overvoltage protection, short circuit protection and overload protection. Hiccup mode, recovers automatically after faulty condition is removed.
5. Upgraded Glass-Fiber Board offers high performance of electrical insulation. Premium Transformer converts incoming line voltage to desired output load easily.
Input Voltage: AC110V/ 220V
Output Voltage: 24V DC
Output Current: 10A
Power: 240W Max
Screw Terminal Number: 9
Cooling: By free air convection.
Shell material: Aluminum case
Dimension: 200 x 110 x 50 mm (L x W x H) 7.8 x 4.3 x 1.9 inch
Net Weight: 690g 1.5lb
L, N, GND: AC power input
+V: DC power output “+”
-V: DC power output “-“
+V / ADJ: fine adjustment of output voltage
Working temperature: -10 to 50 degree Celsius
Storage temperature: -20 to 60 degree Celsius
Environmental humidity: 10-95%
Switching Power Supply Driver for 3D Printer, LED Strip Light, CCTV Surveillance, Industrial Automation, CNC Stepper/Servo System, DSP controller, LED Decorative Lighting, LED Display, Stage Lighting, Communications, Network, etc.
1. In-door use only.
2. Professional Installation of qualified electrician is highly recommended.
1 x JoyNano 240W Switch Power Supply 24V 10A
- Converts AC voltage to 24V DC. LED Indicator.
- Output Current 10 Amp, Power 240 Watt. Efficiency more than 80%.
- Smart device surge protection for Shortage Protection, Overload Protection, Over Voltage Protection
- Widely used in 3D Printer, Industrial automation, LED display, communications, CNC Stepper, etc
- Efficient, long life, stable, and reliable – JoyNano Quality Warranty
Click Here For More Information
Basic requirements: 12V 30A 360W
Rated voltage range: 110-220VAC
Input voltage range: 110-220V
Input frequency range: 47 ~ 63Hz
Input voltage protection: 115 ~ 150% intermittent mode
Input voltage recovery: automatic recovery
Impact current: ≤1%
Machine efficiency: ≤ 0.5%
Output voltage range: 12V ± 0.5%
Output current: 30A
Ripple and noise: ≤100 mVp-p
Rise time: ≤50ms
Voltage regulation rate: ≤0.5%
Load regulation: ≤1%
Output over-current protection: current sag type
Output short circuit protection: IGBT
Output over-voltage protection: soft-start protection
Insulation resistance: > 50MΩ
High-quality materials, heat-resistant, dust-proof and moistureproof, flame-retardant, built-in cooling fan, safe and reliable, can guarantee better cooling effect, the service life of up to 20,000 hours
* This product is not waterproof, please be careful when you use it.
* This Power Supply is only suitable for indoor use, non-detachable power shell.
* Don’t place other items in the product range of 5 cm, to ensure the powersupply with good thermal environment and safety.
* Carefully verify the power link is correct rigorously, power lines reversed before use it. Don’t touch the case during the power is working.
* Don’t place other items in the product range of 5cm, in the range of 50cm within the outlet Do not place other flammable items.
* Do not short-circuit output if no output, please use off one minute re-energized.
* Professional installation of qualified electrician is highly recommended.
* If the power supply is defective, please contact us at first.
1 * 12V 30A Power Supply
- Dimensions: 21.5 * 11.5 * 5.0 cm /8.46*4.53*1.97 inch (L*W*H)
- Operating temperature: -10 ℃ ~ +50 ℃, 20% ~ 95% RH (no condensation)
- Storage temperature: -20 ℃ ~ +85 ℃, 20% ~ 95% RH (no condensation)
- Temperature coefficient: 0.02 ~ 0.05% / ℃
- Cooling method: fan cooling
Click Here For More Information