BIGTREETECH DIRECT BTT SKR Mini E3 V1.2 Control Board + TFT35-E3 V3.0 Touch Screen Compatible TFT35 12864LCD Display WiFi 3D Printer Parts for Creality Ender 3


Introduction:
【BIGTREETECH SKR-mini-E3 】motherboard is the 3D batting of ShenZhen BigTree Technology CO.,LTD
An ultra-silent, low-power, high-quality 3D printer master board launched by the printing team.

Specially for Ender 3 printer to update.

More detailed information about SKR MINI E3 you can visit this website:
https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3

【BIGTREETECH TFT35-E3 V3.0】 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing
team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.
More detailed information about SKR MINI E3 you can visit this website:
https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

Product Features

  • 【 SKR MINI V1.2】: Perfect upgade of Ender 3 machine motherboard
  • 【 SKR MINI V1.2 Stepper motor】: Integration of TMC2209 UART Mode
  • 【TFT35 E3 V3.0】:Touch Screen compatible 12864LCD Display
  • 【 SKR MINI E3 Firmware】: https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3
  • 【TFT35 E3 V3.0 Firmware】:https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

Visit The Website For More Information…

BIGTREETECH DIRECT TFT35 E3 V3.0 Touch Screen /12864 LCD Display Control 3.5 inch Support WiFi Modle 3D Printer Parts for SKR V1.3 PRO Mini E3 Ender3 CR-10


BIGTREETECH TFT35-E3 V3.0 is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of
Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer.

Firmware: https://github.com/bigtreetech/BTT-TFT35-E3-V3.0

1.Product Parameters:
Appearance size:93*87mm
Installation size:Perfectly replace the original LCD screen of Ender3 printer,detail information please check TFT35-E3 V3.0 SIZE
Microprocessor:STM32F207VCT6
Power Input:DC 5V
SD card logic voltage:3.3V and 5V(Such as: support MEGA2560 main control chip motherboard, higher compatibility)

2.Product characters:
1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
2)Upgrade the firmware by SD card. It is easy and convenient to operate.
3)This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
4)Serial port screen mode supports two printing modes: SD card and U disk.
5)Reserve WIFI port, and WIFI function is realized by external WIFI module;
6)Reserve the extension port of filament breaking detection (FIL-DET);
7)Reserve the extension port of automatic shutdown after printing (PS-ON);
8)LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ;
9)TFT touch screen mode:serial port screen RS232 port;
10)2 sets of UART serial port extension ports are reserved for DIY use.

Product Features

  • 1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz;
  • 2)Upgrade the firmware by SD card. It is easy and convenient to operate.
  • 3)This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode.
  • 4)LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ;
  • 5)SD card logic voltage:3.3V and 5V(Such as: support MEGA2560 main control chip motherboard, higher compatibility)

Visit The Website For More Information…

BIQU Metal Kossel Pro DIY 3D Printer Rail Guide Delta Rostock Kit Large Printing Size 250x250x380mm with BLTouch Auto Bed Leveling Sensor and TFT35 Touch Screen

Basic Specification:
Principal:FDM(Fused Deposition Modeling)
Demension:400*420*860mm
Packing Size:915*455*110mm
Net Weight:8.5kg
Shipping Weight:13.5kg
Software Specification
Operation System:Windows MacOs linux
Slice software:cura ,simplify3d ,slic3r
Input Format:STl OBJ
Output Format:G-code

Hardware Specification:
Max printing size:250*250*380mm
Printer Head:1PC
Location Accuracy:0.1mm
Layer Height:0.05-0.4mm
Nozzle Size:0.4mm
Filament Diameter:1.75mm
Control Mode :Online Printing and Offline Printing

Package List:
1xKossel 3D Printer
1xPerching Knife
1xDouble Screwdriver
1xUSB Cable
1xCombination Cut Pliers
1xPower Connector
2xConnector
1xSD Card
1xSD Card Reader
1xPrinted Fan
1x500g PLA Filament
6xM6 Nozzles
1xSet of Allen Key
1xHeated Bed Sticker
1xHeated Bed Power Module Expansion

Product Features

  • Use BLTouch, an auto leveling sensor for delta rostock 3D Printers, more simple, smart and high-precision
  • Upgrade bigtreetech TFT35 touch screen, it is more simple, convenient and natural
  • Large printing volume, 250*250*380mm, satisfy your bigger size printing needs
  • Ultra-quiet printing, use upgraded versionTMC2100 stepper motor driver and BIQU GEN V1.0 control board
  • High precision linear guide version, more precision, more stable

Click Here If You Need More Detailed Info…