This 3D Printer tool kit will make your 3D printing/DIY easy and the printed results spectacular.
Specification of Extruder Tube:
Type : Nozzle Throat
Compatibility : 3D Printer
Outer Thread : M6
Nozzle Throat Outer Diameter:7mm
Nozzle Throat Inner Diameter:4mm
Teflon Pipe Inner Diameter : 2mm
Length : 30mm
Filament Diameter : 1.75mm
Material : Stainless Steel
Specification of Brass Nozzle:
Type :0.4mm Extruder Brass Nozzle Print Head
Input Diameter: 1.75mm
Output Diameter: 0.4mm
Specification of drill kit:
Type :Drill kit
Bit diameter: 0.4mm
The bit length: 8mm
The length of shank: 20mm
How to use the Cleaner Drill Bits:
1. pull out the nozzle head.
2. heating the nozzle head to consumptive material melting temperature (around 200 200 degrees） 3. use the cleaner kit to Drill In (not insert directly which would break the drill bit)
4. when you put the drill bit out of the nozzle head, if there is something like yellow sticky jelly stick on the drill bit (which is very sticky on hand), please replace the nozzle head directly. This is because impurities inside the consumptive material melt, which become a layer of mucus stuck in the nozzle head. Normally you can’t clean them up with the drill bit. So you might need to replace the nozzle throat.
Attention: Small parts, keep away from children
6 x 3D Printer Extruder Tube
6 x 0.4mm Brass 3D Printer Head
3 x Nozzle Cleaning Kit / Drill Bits
1 x 2M PTFE Tube
- [3D Printer Extruders] 2mm ID X 4mm OD, M6 30mm Nozzle Throat, made of Teflon PTFE core and 304 stainless steel material;
- [Brass Nozzle Print Head] High quality Copper (brass)material, for MK8 Makerbot Reprap 3D Printers.The size is 12.5x7mm, Output Diameter is 0.4mm and Input Diameter is 1.75mm;
- [Cleaning Drill Bits] Made of high carbon steel and treated with nickle-iron alloy. Diameter is 0.4mm * Length 8mm. The length of shank is 20mm, great for 3D Print cleanup.
- [PTFE Teflon tubing] 2mm ID X 4mm OD, made of Teflon PTFE core and 304 stainless steel material.
- [Compatibility] Compatible with all 1.75mm PLA ABS 3D printer, suitable for E3D V6 1.75mm Extruder.
Detailed Information available on our Homepage…