3D Print Removal Accessories– 3 Piece 3D Printing Removal Tool Kit – Tools to Remove Models from 3D Printers

Samsung Galaxy Screen Protector ,Tempered Glass Screen Protector for Samsung Galaxy

Product Features

  • EASY REMOVAL: Our tool kit ensures that you can easily lift – not pry – your models from the 3D printer print bed every time.
  • NO DAMAGE: The accessories allow fast and efficient removal of your 3D prints without damaging either the model or the print bed.
  • 3 PIECE KIT: The 3D printing tools are designed to be used either separately or together to gently lift your prints, however small, large or delicate.
  • TOUGH & DURABLE: The high quality wooden handles are pinned to the blade to keep them firmly in position, for reliable results however tough your 3D print removal!
  • AMX3D ACCESSORIES: The best 3D Prints start with the best tools! AMX3d provides 3D printing supplies of the highest quality. If there are any problems with your Removal Tool Kit just let us know!

Detailed Information available on our Homepage…

LEE FUNG 1.75mm PLA 3D Printing Filament Dimensional Accuracy +/- 0.05 mm 2.2 LB Spool DIY Material Tools (Red)

Bright and smooth surface – This filament has strong toughness and uniform in color
Environmental Friendly Material – Made of PLA (Polylactic Acid), can be biodegraded, this material is toxic-free and harmless to human
High Purity – low shrinkage rate, can be used in priting any size of models without warping
Perfect for DIY lovers to design christmas or birthday gifts to your children, families, friends, and lovers, also good for business use to design a model

SPECIFICATION:

– Filament Material: PLA (Polylactic Acid)
– Net Weight: About 2.20 lb (1kg)
– Shipping Weight: About 2.98 lb (1.35kg)
– Filament Diameter: 1.75mm (±0.05mm)
– Recommended extruder temperature:374-446℉ (190-230℃)
– Recommended platform temperature: 104-140℉ (40 – 60℃)
– Spool Type: Plastic Spool
– Spool Diameter: About 7.87 inch (20cm)
– Spool Width: About 2.28 inch (5.8cm)
– Spool Height: 2.76 inch (7cm)
– Spool Hub Hole: About 2.09 inch (5.3cm)
– Test Report: MSDS,FDA, ROHS,EN71-19,17PHTHALATE,REACH
– Package Type: Vacuum package

Product Features

  • Bright and smooth surface – This filament has strong toughness and uniform in color
  • Environmental Friendly Material – Made of PLA (Polylactic Acid), can be biodegraded, this material is toxic-free and harmless to human
  • High Purity – low shrinkage rate, can be used in priting any size of models without warping
  • 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 374-446℉(190-230℃), Spool Diameter: 7.87inch, Spool Height: 2.83inch
  • High Compatibility – Suitable for FDM 3D printer, like Makerbot, Ultimaker, Mbot Cube, UP plus, Mendel, Prusa, series, etc

Check Out Our Website For Details…

14 Sets 3D Printer Nozzle Cleaning & Removal Tools Kit, SourceTon 2 PCS Palette Knife, 10 PCS Needles (5X 0.4mm, 5X 0.3mm) and 2 PCS Tweezers Tools Kit

Directions for Use:

Step 1: To remove prints off the bed, work the edge of the tool under a corner of the print, approximately half way between the tip of the blade and the handle.
Step 2: Use a sawing motion to get the tool under the rest of the print to separate it from the bed. Tilting or twisting the blade slightly will help speed up the lifting of the print.
Step 3: If the print is firmly stuck to the print bed, try pushing the tool so that the handle is closer to the print. This brings the thicker part of the blade (closest to the handle) under the object and acts as a wedge to help pry the part up. Wiggle the blade loose and repeat.
Step 4:If the print is stuck too firmly to remove with the tool, you may need to slightly increase your starting nozzle elevation. The idea is to have the print stick firmly to the bed during printing, but still be removed with the tool.
Step 5: If the nozzles blocked, check the size of output diameter and choose the correct needle. Then, clean the nozzles by cleaning needles and tweezers.

Product Features

  • VARIOUS SIZE – 10 pieces cleaning needles in 2 different size 0.3 mm, 0.4 mm, suitable for cleaning most of your 3D Printer nozzles.
  • PREMIUM QUALITY- Both needles and tweezers are made of high quality stainless steel, flexible, sturdy and durable. The palette knife have a plastic handle and a sharp & hardened blade.
  • STYLISH AND USEFUL- The spatulas have a brown ergonomic plastic comfort grip, one of them has a short beveled front edge, another one has a flat long front edge.
  • WIDE COMPATIBLE- Compatible with most of 3D printers extruder nozzles, such as E3D Makerbot, MK8 Makerbot RepRap and so on.
  • VALUE PACKAGE- The package includes: 2 x Palette Knife, 10 x Needles (5x 0.4mm, 5x 0.3mm) and 2 x Tweezers.

Detailed Information available on our Homepage…