Name:V6 Throat Heat with TeflonTube
Size: V6 Bodwen
Material: All metal
Suit for: 1.75mm Filament
Screw Threads: M6
Heat break: Cost-effective
1. Heat Break: cost-effective
2. All metal Heat Break: corrosion-resistant, high temperature resistant, durable,
suitable for high-temperature 3D printing that other throat cannot handle
3. High-Quality Heat Break: Higher Temperature Resistance
4. Production equipment: High-precision imported professional
equipment to better ensure product consistency.
5.Deburring treatment: Four major processes, strict quality assurance. No burrs anti-oxidation and clean surface
6.Our High-quality Heat Break Throat(There are no obvious burrs in the inner hole, and spit out filament is more smooth)
- Size: V6 Bodwen
- Material:Metal and PTFE
- Suit for: 1.75mm Filament
- Screw Threads: M6
- Heat break: Cost-effective
Visit The Website For More Information…
Compatibility: Compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Installation: connecting by the outer thread of the quick fitting.
Disassemble: press and hold the blue or black end of the quick fitting and pull out the tube.
Attention: small 3D printer accessories, please keep away from children.
➤Widely applied for connecting extruders, PTFE fittings.
➤Pneumatic fitting supports turn 360 freely, Easy to install and remove.
➤2 end connections of quick fittings is able to bear greater and stronger impulse but won’t coming off.
Smooth surface, Non-stick & Corrosion resistance.
Environmentally friendly and pollution free & Durable.
Self-lubricating: can convey materials smoothly with smallest friction coefficient.
High&low temperature resistance: usable temperature -190℃~+260℃, almost unaffected by temperature.
Material: PTFE (Poly Tetra Fluoro Ethylene)
Outside Diameter: 4mm
Inside Diameter: 2mm
Inner diameter(blue end): 4mm
Material: copper and plastic
Inner diameter(black end): 4mm
Material: stainless steel and plastic
Color:black + silver
2 x 2M PTFE tube (2.0mm ID/4.0mm OD)
4 x PC4-M6 fittings
4 x PC4-M10 fittings
➤If you have any question, just click on the “Contact Seller” button or leave your question into “Customer Questions & Answers” .
- Teflon Tube: Durable material: PTFE; Length: 2m; OD 4mm, ID 2mm
- PC4-M6 fittings: thread M6/3mm, inner diameter(blue end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of premium copper and plastic, sturdy and durable
- PC4-M10 fittings: thread M10/6mm, inner diameter(black end) 4mm, fit for the tube whose outer diameter is 4mm, the fitting made of stainless steel and plastic, high hardness, antioxidtion, anti corrosion
- Compatibility: compatible with all 1.75mm PLA ABS 3D printer
- Installation: connecting by the outer thread of the quick fitting, easy to install
Detailed Information available on our Homepage…
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350 degrees
Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.
3 x 12V 50W Ceramic Cartridge Heater
- Apply to Creality CR-10S Pro, CR-X, Ender 3, Ender 3X, Ender-3 Pro, Anet A8, Maker Select V2.1, Monoprice v2, Wanhao Duplicator 3D Printer, V6 Volcano MK8 MK9 MK10 Extruder/Hotend etc.
- The improvement compared to ordinary red heating tube:
- 1.From the original ordinary 0.3-line high-temperature line to 0.5-line thick white high-temperature line, can bear higher temperature, and looks more beautiful.
- 2.From the original 40W power to 50W, the maximum temperature increases from 300-31℃ to 340-350℃. Can be used with the new HT-NTC100K temperature thermistor.
- 3.The new version heater used in all imported skills, the use of 304 stainless steel, with the internal use of 2080 nickel chrome wire to achieve maximum service life.
Visit The Website For More Information…