3D Printer Replacement Parts Ender 3 Hotend Extruder Heating Kit
with Capricorn Bowden PTFE Tubing XS Series
3D Printer Creality Ender 3 Pro Extruder Hot End Kit:
Material: Aluminum & Stainless Steel & Brass.
Installation type: external thread connection
Nozzle size: 0.4mm
Operating temperature range： -40 ~ +260°C (-40 ~ +500 °F)
Capricorn Bowden PTFE Tubing:
1）Capricorn Teflon tube is well regarded as the highest quality PTFE tubing in all of 3D printing.
The tight tolerances make sure that the filament is lead directly to the hot end with as little
room for error as possible between the extruder and the hot end.
2) Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the
market which is perfect for printing exotic filaments such as ABS, Nylon, and
Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if
the hot end is heated to temperatures beyond 240*C and will get worse with higher heats.
This Capricorn XS series is safe in 3D printer usage up to 300*C thanks to its
proprietary manufacturing methods
24V Cooling and Circle fan:
Fans easy installation and high-efficiency heat dissipation;
Cooling fans with Low noise and 6000r/min rated speed;
2 Terminal Connector with 2pin-ph2.5
1× Ender 3 Hot End Kit with Capricorn PTFE Tubing XS Series
1× 24V Cooling Fan
1× 24V Circle Fan
- 2020 Upgraded Ender 3 Hotend Extruder Kit for Creality Ender 3 / Endere 3 Pro / Ender 3X
- Creality Ender 3 replacement extruder be upgraded with Capricorn Bowden PTFE Tubing which high temperature resistant and not easy to carbonize during printing
- Original Creality 24V 4010 Cooling Fan and 24V Circle Fan for 3D Printer Parts Ender 3/Ender 3 Pro/ Ender 3X; Fans easy installation and high-efficiency heat dissipation; Cooling fans with Low noise and 6000r/min rated speed; 2 Terminal Connector with 2pin-ph2.5
- Creality 3D Printer Heater Block Silicone Cover MK7/MK8/MK9 Hotend and 5 Pieces 0.4mm Nozzles for ender 3 / ender 3 pro
- Creality 3D Printer Ender 3 Pro Extruder Hotend kit, white wire was temperature thermistor, braided wire was heating tube 24V40W
Visit The Website For More Information…
This upgrade bundle is not only great value for money, it is also guaranteed to give immediate improvements to your printing experience due to every single item included being far superior to the cheap Chinese stock counterparts that came with your printer. The high manufacturing standards for Capricorn PTFE tubing ensure that all tolerances are very tight and uniform through the length of the Bowden tube. Many cheap printers come with sub-par PTFE not designed for 3D printers and this can result in poor extrusion and poor retraction artifacts on your 3D printed models. The upgraded fittings with metal teeth ensure the PTFE tubing will not pull out once firmly grasped by the upgraded stainless steel fittings. NOTICE: THIS BUNDLE OF PARTS CONTAINS A RANGE OF PARTS, INCLUDING CAPRICORN PTFE TUBING, AND SOME OTHER PARTS SOURCED BY F1RST LAYER WHICH, AFTER EXTENSIVE TESTING, HAVE PROVEN TO PROVIDE BETTER PERFORMANCE THAN STOCK PARTS ON MANY CHINESE MANUFACTURED PRINTERS. NOT ALL PARTS IN THIS PACKAGE ARE MANUFACTURED BY CAPRICORN.
- Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend.
- Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. Standard PTFE tubing may experience dangerous “off-gassing” if the hotend is heated to temperatures beyond 240*C and will get worse with higher heats. This Capricorn XS series is safe in 3D printer usage up to 300*C thanks to its proprietary manufacturing methods.
- Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer manufacturers with plastic teeth or cheap locking mechanisms. The extruder fittings are PC4-M6 and the hotend fittings are PC4-M10. A clip is also provided which drastically increases any hotends precision by eliminating any potential slippage of the Bowden tubing whilst extruding or retracting.
- One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
- 1 Meter in length PTFE tubing
Visit The Website For More Information…
Capricorn Premium XS bowden Tubing
Additives: Blue Color and Secret High Lubricity Additive Mixture
Best For Chunky Filaments: YES
Best For Flexible Filaments: YES
Color: Dark Blue
Inner Diameter (mm): 1.90 +/- 0.05
Outer Diameter (mm): 3.95 +/- 0.05
Material: Highest Quality Pure Virgin PTFE
Melting Point: up to 340° C
Upgraded Creality 3D Printer All Metal MK-8 Extruder
Material: Aluminum Alloy
Drive Gear:40 Teeth
1 x 1M Capricorn Premium XS bowden Tubing
1 x Gray MK8 extruder drive feed kit
4 x Bed-level springs
1 pair- small and large pneumatic couplers
After sale service and technical support
If you have any issue, please kindly contact us. We will reply as soon as possible within 24 hours.
We will offer you professional customer support and strive our best to offer your solutions.
- 1*Upgraded Creality 3D Printer All Metal MK-8 Extruder Feeder Drive 1.75mm Filament for Ender 3/3 Pro/3 X, Ender 5/5 Plus/5 Pro, CR-10 Series, CR-10S, CR-10 Plus, CR 20/20 Pro, CR-X.It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- 1 pair- small and large pneumatic couplers to secure PTFE in extruder and hotend.
- 4* bed-level springs for stiff and accurate bed leveling.
- Professional Customer Support – If you have any problem or question for our product,please feel free to contact us. We will repond within 24 hours and offer professional technical support to you.
Click Here If You Need More Detailed Info…