Sunkee 3D printer motherboard MKS – BASE V1.2 reference Ramps1.4 compatible

Product Features

  • all the functionality set on a board, solved the Ramps1.4 combination interface trival, easily out of order. using 4982 as a motor drive, and 4988 performance, but the SOP encapsulation, the effect of heat dispelling better.
  • circuit board USES the high quality 4 layer board, and the thermal optimization;Ramps is 2 layer board. using high quality MOSFET tube, the effect of heat dispelling better
  • using special power supply chip, support the 12 v and 24 v power input, solve the problem of Ramps voltage conversion chip fever. can accept 24 v input, under the same system power can reduce the current hot bed to 1/4, effectively solve the problem of hot bed MOS tube heating.
  • firmware, you can use open source firmware Marlin, configuration and ramps1.4 are exactly the same, can be directly replace ramps1.4. can be directly connected Ramps1.4, 2004 LCD control panel and the LCD panel (12864).

Click Here For More Information

3D printer control board MKS Gen V1.2, sending USB line (with A4988)

The advantages of: 1, 2560 and ramps1.4 set on a board, solves the Ramps1.4 combined interface cumbersome, easy fault problem. 2, can drive the motor is replaced, in support of the 4988 drive and the 8825 drive. 3, the circuit board is a 4 layers of high quality, and the optimization of processing special heat dissipation; ramps is the 2 laminates. 4, use the high quality MOSFET tube, better heat dissipation effect. 5, using special power chip, support 12V-24V power input, to solve the heating problem of Ramps voltage conversion chip. 6, can accept 24V input, the same system power under the current to the 1/4 decreases the hot bed, effectively solve the problem of heat pipe heating bed MOS. 7, the firmware can use open source firmware Marlin, configuration and ramps1.4 exactly the same, can directly replace the Ramps1.4. 8, can be directly connected to the Ramps1.42004LCD control board and 12864LCD control board. 9, the reserved motor pulse and direction for the output ports, convenient to plug a large current to the external high current (2A, 5A) motor drive circuit. 10, Ramps1.4, AUX-1, Servos retains the AUX-2 interface, to provide 3 5V output, 3 12V output interfaces.

Detailed Information available on our Homepage…

RioRand 6 x Mechanical Endstops V1.2 with 4-pin cables for 3D Printer,Reprap,Mendel

The mechanical endstop uses a lever switch to detect when it is activated. The switch is wired up so that when activated, it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated.It uses a standard 4 pin .100″ pitch header and accepts a standard, old-style CD-ROM audio connector cable.

Package List:
6 x Mechanical Endstops V1.2
6 x 4-pin cable for endstop

Product Features

  • Powered by RioRand Advanced Technology

Detailed Information available on our Homepage…