Aibecy 7/8/9mm Hexagonal Sleeve + Wrench + Dual-Use Extruder Nozzle Removal Tool 3D Printer Accessory

Features:
The nozzle can be easily and freely changed while the heater block is stationary.
Remove the heater block from the side and use the tool to remove and replace the nozzle and the heating block.
When using this tool, there is no need to cumbersome removal of other accessories for the printer.
Curved handle with arc design Increases the operating space without hurting the hand.
6-angle drive arc inner corner design, stronger locking force and less slippery.

Specifications:
Material: Metal + Plastic
Fixture Size: 15 * 3.5 * 2.6cm/ 5.9 * 1.4 * 1.0in
Wrench Size: 15.5 * 2.8 * 2.8cm/ 6.1 * 1.1 * 1.1in
Sleeve Hexagonal Inner Diameter: 7mm/8mm/9mm
Package Size: 18.5 * 15 * 2.8cm/ 7.3 * 5.9 * 1.1in
Package Weight: 296g/ 10.4oz

Package List:
3 * Hexagonal Sleeve
1 * Wrench
1 * Nozzle Tool

Product Features

  • The nozzle can be easily and freely changed while the heater block is stationary.
  • Remove the heater block from the side and use the tool to remove and replace the nozzle and the heating block.
  • When using this tool, there is no need to cumbersome removal of other accessories for the printer.
  • Curved handle with arc design Increases the operating space without hurting the hand.
  • 6-angle drive arc inner corner design, stronger locking force and less slippery.

Detailed Information available on our Homepage…

MakerHawk 20 Sets Anti-Vibration Rubber Landing Mat Feet, T Sliding Nut Block Square Nuts, M3 Screws with 1pc Wrench 3D Printer Accessories for 2020 Aluminum Extrusion Profile

20 Sets Anti-vibration Rubber Landing Mat Feet, T Sliding Nut Block Square Nuts, M3 Screws with 1pc Wrench 3D Printer Accessories for 2020 Aluminum Extrusion Profile

Specification:
Colour: Black
material: Rubber
Function: Anti-vibration, Anti-friction to protect the printer(when the printer is in direct contact with the desktop or the ground, it will be weared out.)
Quantity: 20 sets

T Nut M3:
Material: Metal
Used for T slot 2020 aluminum extrusions
3D printer hardware accessories
Size: 10 * 10 * 5mm, Slot Width: 6mm; Thread Diameter: 3mm (m3)

How to install:
1.If you use in the 3D printer, which need the 4x Anti-vibration feet
2.Turn the YZ frame on the side and insert the antivibration foot inclined, then rotate the foot until you squish the rim inside the extrusion.
3.Repeat this process on all 4 feet. Place them 2-3 cm from the end of each extrusion.

Package Including
20 * Antivibration feet
20 * 2020 T Sliding Nut Block Square nuts M3
20 * M3 screws
1 * Wrench

Product Features

  • High Quality! Made of rubber, strong and durable, long service life.
  • Function: Shockproof, Anti-friction, to protect the printer.
  • Used for T slot 2020 aluminum extrusions, 3D printer hardware accessories.
  • .Package Contents: 20pcs anti-vibration feet, 20pcs 2020 T Sliding Nut Block Square nuts M3, 20pcs M3 screws, and a wrench as a gift for you.
  • Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerHawk-US” and click “Ask a question” to email us! Looking forward to your consultation!

Detailed Information available on our Homepage…

Nozzle Replacement Tool for MK10 M7 3D Printer Change Tool Screw Driver Spanner Wrench Sleeve

No more burnt fingers for you!
This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!

HOW TO REPLACEMENT NOZZLE
Step 1:Turn on 3D Printer, set nozzle temperature to target (PLA: 180-220, ABS: 240-280).
Step 2:After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don’t touch by hands!!!
Step 3:Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done.

Notice: NOZZLE and Heat Block on 3D printer need heat before take out, don\’t touch it by hands when printer is heading or close less than 10 mins.
Package include:
21mm Wrench * 1pc
9mm Sleeve* 1pc
2 in 1 Screw Driver * 1pc
Screw Handle * 1pc

Product Features

  • No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!
  • Compliant with 3D printer who has MK10 nozzle
  • Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!
  • You should heat heating block before Change or Assemble nozzle, otherwise maybe leakage
  • Note: Screwdriver maybe rust, but No effect on use.

Click Here For More Information