USB Heated 3D Printer Finishing Tool With 4 Coated Tips Designed To Finish, Repair and Modify 3D Printed Parts, Soldering Iron Tool

USB powered heated tool with long life soldering tip, with LED indicator light and touch switch. Includes coated interchangeable tips designed to finish, repair and modify 3D printed parts. Replaces much of the sanding, scraping and snapping tool to finish off your 3d prints. Designed to finish 3D printing models. Fully functioning USB powered soldering iron. Small and compact for portability. Rapid heat up and instant recovery. Long life tip can be easily replaced and has protective cap. 4 interchangeable tips included: needle, knife, scoop and point. Special tip coating to prevent sticking. Basic stand included. Power: 8 W. Input: 5 VDC USB 2.0 / 3.0 recommended. Highest heating temperature: 380°C – 400°C , 716°F – 752°F. Heating time: < 15 seconds. Cooling time: < 30 seconds. Auto Shut Off (sleep mode): 25 seconds idle. LED indicator: Yes

Product Features

  • PRECISE: The pen like form makes it very comfortable to use and easy to control when precision is important. Works with PLA, ABS and other 3D printing materials.
  • REPLACES: The sanding, scraping and snapping tool to finish off your 3d prints.
  • 4 SPECIALLY COATED TIPS: 4 interchangeable tips included: needle, knife, scoop and point. Tips have special coating to prevent plastic sticking to the tip.
  • TIPS INCLUDE: KNIFE for cutting and removing sections including the removal of supports, brims, and rafts from your 3D print; NEEDLE: for clearing small holes and features or for detailed layer refinements in hard to reach places; POINT: general purpose tip for larger internal features and holes. Can also be used to make holes after printing; SCOOP: perfect to remove stringing and imperfections from inside holes or recesses. Can also be used to blend surfaces
  • COMPACT: Small and compact for portability. Size: 0.59″ x 6.06″ – 15 x 117 mm (without tips). Weight: 4.23 oz – 120 g

Visit The Website For More Information…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

2 thoughts on “USB Heated 3D Printer Finishing Tool With 4 Coated Tips Designed To Finish, Repair and Modify 3D Printed Parts, Soldering Iron Tool”

  1. 3 uses? **UPDATE**LASTED 3 USES THEN LIGHT COMES ON BUT IT NEVER HEATS UP USELESS!!!It does an okay job of melting pla and TPU but does not work as well on abs. The problem I’ve had with it is not about the heating (or maybe if it were hotter it would be better) the problem is the tips are very small so they are of little use as a finishing tool, they do a good job removing supports and help to bind poor bridges but certainly no better than a soldering iron, add a 1/2″ piece of…

Leave a Reply

Your email address will not be published. Required fields are marked *